EPDM ROOFING MATERIALS COVERAGE RATES AND SIZES

 Accessory Products  Sizes
 WeatherBond Peel & Stick Seam Tape  3" x 100'
 WeatherBond Peel & Stick Uncured Flashing  6", 9", & 12" x 100'
 WeatherBond Peel & Stick Reinforced Perimeter Strip  6" x 100' & 12" x 50'
 WeatherBond Peel & Stick Cover Strip  6" x 100'
 WeatherBond Peel & Stick Inside/Outside Corners  7" x 9"
 WeatherBond Peel & Stick T-Joint Covers  6" x 6"
 WeatherBond Peel & Stick Pipe Seal  1" - 6"
 WeatherBond Peel & Stick Pourable Sealer Pockets  4", 6", & 8"

 

 Adhesive / Cleaner Products  Coverage
 WeatherBond LC-60 Bonding Adhesive or Aqua-Base Adhesive  Net 50-60 square feet/gallon*
 Weathered Membrane Cleaner  600 square feet/gallon
 Multipurpose Primer (used under seam sealant and cover strip)  3" x 300 linear feet
 WeatherBond Lap Sealant / M-1 Sealant  20 linear feet/tube
 One-Part Pourable Sealer  1/2 gallon/pouch
   
* Apply at 100 sq.ft. per gallon PER SURFACE. Apply to both base AND EPDM membrane. Finished area will need about 2 gallons per 100 square feet.  

Related Items:

 EPDM Roofing Materials
 
 
  Enter roof characteristics in the white boxes below and click
"Calculate" to get complete material estimates.
 
   

Roof Length (ft):

 
Roof Width (ft):
 
Number of Inside and Outside Corners (Chimney, Skylight, etc.):
 
Number of Pipes:
 
Parapet Wall Length* (ft):
 
   
 
*A parapet wall is defined as a vertical wall that runs along and above the edge of a roof.
   
 
   
 Item Dimensions Coverage  Quantity Needed
 Rubber Roofing
 EPDM Membrane
45-mil and 60-mill thickness
10' x 50'
10' x 100'

 500 sq. ft.
1000 sq. ft.
   sq. ft.
 Rubber Roofing Adhesive 5 gallon pail 300 finished sq. ft. per pail    pails
 Multipurpose Primer 1 gallon 3" x 300 linear ft.    gallons
 Peel & Stick Seam Tape 3" x 100' roll 100 linear ft.     rolls
 Peel & Stick Cover Strip 6" x 100' roll 100 linear ft.     rolls
 Peel & Stick Inside/Outside
 Corners
7" x 9" 1 / inside or outside corner    corners
 Peel & Stick Pipe Tape 1" x 6" 1 per pipe    pipe seals
 Peel & Stick T-Joint Covers 6" x 6" As required    patches
 Lap Sealant 11 oz. tube 22 linear ft.    tubes
       

 
 
WeatherBond RBR Materials estimator is designed to facilitate the development of a materials list. Due to the unique nature of each individual project we make no representations that the list provided will be absolute.