|
|
|
|
| Shopping
Cart: |
|
0
Items
In Cart |
| Total:
$0.00
|
|
 |
|
|
 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
POLYCOAT STAINGARD 1110 CLEAR WATERPROOFING TOPCOAT, 1G KIT
|
| POL-1110C |
$94.00 SALE $78.95 |
| (Savings: $15.05) |
|
|
| |
|
|
|
|
| |
| |
| |
PRODUCT: POLYCOAT STAINGARD 1110C
CLEAR. 1 GAL KIT (A+B CANS). PRICE/KIT.
COLOR: CLEAR Gloss finish
(tan, black and gray also available)
DESCRIPTION
Polycoat-Staingard 1110 is a two component, aliphatic polyester-polyurethane finish topcoat for use in moderate to severe chemical
and traffic environments in either indoor
or outdoor applications. Excellent fuel, oil and solvent resistance.
APPLICATIONS:
-
FINISH Waterproofing for Concrete or Wood Decks (used OVER waterproofing basecoat such as PC260 or PC440
basecoats)
-
Concrete
-
Stained Concrete
(test first)
-
Plywood
-
Pedestrian Traffic
-
Vehicular Traffic
-
Power Generating Plants
-
Storage Tanks
-
Food Processing Facilities
-
Petrochemical Plants
-
Steel Structures & Bridges
-
Aircraft Hangars
-
Milling and Mining Industry
-
Manufacturing Plants
-
Warehouse floors
APPLICATION:
Preparation:
All surfaces must be free of oil, grease, dirt and other contaminants.
Existing Coatings: A test area should be completed before top coating.
Prime interior and exterior floors and slabs, or apply as a finish topcoat
over Polycoat basecoat waterproofing systems.
Coverage: Apply Polycoat-Staingard 1110 to the substrate
at a rate of one-half gallon per 100 sq. ft. (1.9 liters/m²) per
coat (results in 5+/-2 mils dry film thickness).
Generally two coats are applied. Additional coat may be necessary to
achieve desired results. DO NOT APPLY THICKER COATS.
RECOMMENDED:
Roller- Use solvent resistant phenolic core, short nap sheepskin or equal
natural roller covers.
Brush: Use solvent resistant chip brush with mohair or natural bristle brush with feather
edge.
Conventional Spray: Variations of conventional production spray equipment
such as pressure pot, air assisted airless or high volume, low pressure
systems as supplied by Binks, Graco, Nordson, Devilbiss or equal may be
used.
Airless Sprayer: Use Graco 28:1 pump or higher, Binks “Airless” spray gun
with Reversa-Clean 0.017-0.019 spray tips and a" solvent resistant fluid
line. Adjust pump pressure to the lowest possible setting that provides
proper atomization. Equipment of equal performance is acceptable.
WARNING: This product contains Isocyanates and Solvent. Part-A of this
product is considered Dangerous Goods. DOT regulations classify it as:
PAINT, Class 3, UN 1263, PG III, FLAMMABLE LIQUID. SHIPPING SURCHARGES
APPLY.
Product
Datasheet
MSDS Sheet: Call
562-802-8834 or email sales@polycoatusa.com
Questions?
Email us at
sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
similar terms: Polycoat,
clear sealer, clear topcoat, clear cement coating, stainguard, staingard,
1110, topcoat, top coat
|
|
|
|
|