0   Items  In Cart
 TOTAL: $0.00

 
Polycoat Staingard 1110 Dolphin Grey 5G Kit - POLYCOAT STAINGARD 1110 DOPHIN GREY. 5-GALLON KIT.  (2 GALLONS A + 3 GALLONS B).
(Ground shipping only; High VOC cannot ship to SCAQMD or restricted states.)
 
Polycoat Staingard 1110 Dolphin Grey 5G Kit
POL-1110DG-5
$536.00
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 

PRODUCT: POLYCOAT STAINGARD 1110 DOLPHIN GREY COLOR. 5-GALLON KIT (A+B CANS). PRICE/KIT. (Ground shipping only; High VOC cannot ship to SCAQMD or restricted states.)

COLOR: DOLPHIN GREY Gloss finish (tan, black, grey, indian sand and clear also available)

DESCRIPTION
Polycoat-Staingard 1110 is a two component, aliphatic polyester-polyurethane for use in moderate to severe chemical and traffic environments in either indoor or outdoor applications. Excellent fuel, oil and solvent resistance.

APPLICATIONS:
  • Finish Waterproofing Concrete or Wood Decks (use over PC260 or PC440 basecoats)
  • Concrete
  • Stained Concrete (test first)
  • Plywood
  • Pedestrian Traffic
  • Vehicular Traffic
  • Power Generating Plants
  • Storage Tanks
  • Food Processing Facilities
  • Petrochemical Plants
  • Steel Structures & Bridges
  • Aircraft Hangars
  • Milling and Mining Industry
  • Manufacturing Plants
  • Warehouse floors
APPLICATION:
Preparation: All surfaces must be free of oil, grease, dirt and other contaminants.
Existing Coatings: A test area should be completed before top coating.
Prime interior and exterior floors and slabs, or apply as a finish topcoat over Polycoat basecoat waterproofing systems.
Coverage: Apply Polycoat-Staingard 1110 Pigmented to the substrate at a rate of one-half gallon per 100 sq. ft. (1.9 liters/m²) per coat (results in 5+/-2 mils dry film thickness).
Generally two coats are applied. Additional coat may be necessary to achieve desired results. DO NOT APPLY THICKER COATS.
RECOMMENDED: Roller- Use solvent resistant phenolic core, short nap sheepskin or equal natural roller covers.
Brush: Use solvent resistant chip brush with mohair or natural bristle brush with feather edge.
Conventional Spray: Variations of conventional production spray equipment such as pressure pot, air assisted airless or high volume, low pressure systems as supplied by Binks, Graco, Nordson, Devilbiss or equal may be used.
Airless Sprayer: Use Graco 28:1 pump or higher, Binks “Airless” spray gun with Reversa-Clean 0.017-0.019 spray tips and a" solvent resistant fluid line. Adjust pump pressure to the lowest possible setting that provides proper atomization. Equipment of equal performance is acceptable.


WARNING: This product contains Isocyanates and Solvent. Part-A of this product is considered Dangerous Goods. DOT regulations classify it as: PAINT, Class 3, UN 1263, PG III, FLAMMABLE LIQUID. SHIPPING SURCHARGES APPLY.
Product Datasheet
MSDS Sheet

Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!

similar terms: Polycoat, clear sealer, clear topcoat, clear cement coating, stainguard, staingard, 1110, topcoat, top coat
 



Shop with
Peace of Mind!