PRODUCT: POLYGUARD PREFORMED INSIDE CORNERS / DAMS, 8x8x8". PRICE/EACH. (leadtime 2-3 business days)
DESCRIPTION: The POLYGUARD PREFORMED INSIDE FLASHING CORNER AND END DAMS are a 40 mil combination of rubberized asphalt bonded to a cross laminated polyethylene film. The adhesive surface is covered with a release liner. The PREFORMED FLASHING CORNERS AND END DAMS provides maximum protection against moisture infiltration at inner corners as well as any vulnerable location such as near the jamb lines above and below wall openings. It bridges the flashing where it terminates, forming a continuous water deterrent seal.
ADVANTAGES: At present, flashing around corners requires a series of cuts, folds, flaps and patching with mastic. This is a time consuming, difficult procedure which often results in a less than desirable corner condition. POLYGUARD PREFORMED INSIDE CORNERS AND END DAMS offer an easy and practical method of field installation, eliminating as much as 10 minutes (per corner) of expensive field labor time. But most important, the design provides maximum protection against water penetration at outside corner conditions.