|
| |
|
|
|
M-1 Sealant Adhesive, WHITE, 10.1 Oz Tube (1)
|
| F1270W-1 |
$8.25 SALE $6.25 |
| (Savings: $2.00) |
|
| |
|
|
|
Buy
24
or more and pay $5.92 each (save $2.33)
|
|
Buy
240
or more and pay $5.52 each (save $2.73)
|
|
|
| |
|
|
|
|
| |
| |
| |
PRODUCT: M-1, STRUCTURAL SEALANT /
ADHESIVE & LAP SEALANT, WHITE COLOR, 10.1 OZ. TUBE. 24/CASE (1080/PALLET). PRICE/TUBE.
APPLICATIONS: M-1 is a high performance silyl-terminated, solvent free, UV resistant, moisture curing polyether
(tri-polymer). It is a multi-purpose structural sealant designed for difficult bonding and sealing applications. Its ideal as a cut edge / seam sealant on EPDM, TPO and other roofing membranes. It bonds aggressively to EPDM, PVC, BUR, coal tar, SBS modified bitumen, granulated APP, asphalt shingles, many types of coated metal, metal flashing details and window glass. For TPO roofing, use
TPO Primer
together with M1 sealant.
Also excellent for underwater or below grade repairs. It can be used for emergency repairs of
pools, ponds and flat roof repairs. M-1 is a non-slumping, self-fixturing mastic that
cures with a tough durable rubber bond using atmospheric moisture.
M1 develops a high 50-55 Shore-A hardness and also
excellent resistance to dirt pick-up. It is used for pool wall-to-deck repairs and more. It
has a high resistance to damage from cleaning and ease of dirt removal.
M-1 is paintable within 24 hours.
M-1 develops 300 lbs. per square inch of shear strength on
metal, masonry and wood. It is capable of 300% elongation and can accommodate
dimensional changes in construction materials down to minus 20 degrees F, and is
solvent free.
It's a tough adhesive
capable of bonding steel deck to bar joists and metal sandwich panels to roof
and wall purlins.
Contains no
solvents or VOC's.
SUBSTRATES / USES:
-
Concrete (fully
cured / dry)
-
Block, Brick,
Masonry, Stone
-
Metals, Aluminum,
Galvanized
-
EPDM, PVC, SBS
modified bitumen
-
Asphalt shingles,
Granulated cap sheet
-
TPO roofing, with
use of primer.
-
Glass, window
frames
-
Wood, painted
wood
-
Foam, Vinyl
-
Pool wall, pool
tile adhesion
-
Interior /
Exterior
-
Withstands
ponding water
-
TPO primer is
recommended for best results in all continuous immersion applications.
LIMITATIONS:
-
Do not apply less than
40F. 50F+ recommended for application and cure.
-
Do not use on Kynar
finished metal roofing (Use Duralink).
-
Service Temperature:
-40F to +200F continuous.
-
Less than 1/2" thickness
recommended
-
1/4" and greater joint
width.
-
Do not apply over
silicone sealants.
CURE:
Cures tack free in 35-45
minutes. Cures complete in 3 to 7 days depending on temperature, humidity and
thickness. Higher temperatures and moisture accelerate curing cycle.
INSTALLATION:
Bonding surfaces must be clean and free from
dirt, oil and debris. If surfaces require cleaning, wire brush or use alcohol. Don't apply
below 30F. See data sheet for detailed instructions.
TECHNICAL DATA SHEET
MSDS SHEET
similar product terms: m1 sealant, m-1 sealant, m-1 caulking, chemlink m-1, lap sealant, geocel 2300, geocell 2300, tripolymer sealant, tri-polymer sealant, 2300 sealant, high performance sealant, shingle adhesive, roof sealant, roof caulk, structural sealant, adhesive sealant, structural adhesive |
|