PRODUCT:
In-Stone TINTABLE Penetrating Stain for Masonry. 1-GALLON CAN.
PRICE/CAN.
PRODUCT DESCRIPTION:
IN-STONE is a water-based, modified acrylic
designed to penetrate porous vertical concrete and masonry surfaces.
This penetrating,
semi-transparent stain adds color to substrates such as standard or split-faced
concrete block, pavers, cast-in-place concrete, or other concrete and masonry
surfaces.
It possesses
excellent color stability, ultraviolet resistance, alkaline and pollution
resistance.
IN-STONE is
integrally locked into the substrate as a result of its low viscosity and
microscopic penetration properties, thus preserving the existing detail on
decorative textures.
IN-STONE will not
crack or peel when properly applied.
SURFACE PREPARATION
Surfaces must be sound, clean and free of all dirt,
oil, grease and efflorescence. Test the surface to be stained by wetting it.
Non-porous or smooth-trowel concrete surfaces that do not readily absorb
water pose potential problems and must be sandblasted or acid-etched prior
to application of IN-STONE.
BASIC USES
IN-STONE provides a decorative color finish to
vertical surfaces such as standard or split-faced concrete block, pavers,
cast concrete, or other porous concrete or masonry substrates. Since it does
not interfere with the natural water migration qualities of these surfaces,
IN-STONE is also effective for use on retaining walls. It will not allow
hydrostatic pressure build-up to occur, which can result in peeling and
surface spalling with film-forming materials.
COLORS
IN-STONE provides a semi-transparent finish, allowing
decorative surface textures as well as certain background aggregate colors
to remain visible, while uniformly toning the substrate.
IN-STONE is supplied as a clear base, which is
tinted by the local distributor or supplier using standard exterior
colorants.
IN-STONE is semi-transparent, therefore the finish
color will be affected by the color of the masonry being treated.
Application of IN-STONE will not repair or correct
cracked, chipped or otherwise damaged surfaces.
IN-STONE is a low viscosity material designed to
provide color toning without disturbing the natural texture of the
substrate.
It is not designed to provide waterproofing over
concrete or masonry substrates.
PHYSICAL PROPERTIES:
1. Solids by Weight:
10% [ASTM D2369]
2. Solids by Volume:
10% [ASTM D2697]
3. Weight per Gallon:
8.4 lbs. (3.8 kg) (±.2)
4. Dry Time Between Coats: 2 hours
@ 75°F (24°C), 50% R.H. [ASTM D1640]
5. Cure Time:
7 days @ 75°F (24°C), 50% R.H.
[ASTM D1640]
6. Temperature Limits for Normal
Service Conditions:
-7°F to 200°F (-21°C to 93°C).
MORE PRODUCT INFORMATION:
Product
Technical Spec Sheet
MSDS
Sheet
similar terms: masonry
stain, concrete stain, brick stain, block stain, wall stain, block wall
stains
|