|
|
| Shopping
Cart: |
|
0
Items
In Cart |
| Total:
$0.00
|
|
 |
|
|
 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
ETERNABOND ROOFSEAL GRAY 4" X 50' ROLL
|
| RSG-4-50 |
$80.00 SALE $49.20 |
| (Savings: $30.80) |
|
| |
|
|
|
Buy
6
or more and pay $47.90 each (save $32.10)
|
|
|
| |
|
|
|
|
| |
| |
| |
PRODUCT: ETERNABOND ROOFSEAL,
GRAY COLOR. 4" WIDE X 50' ROLL. PRICE/ROLL.
APPLICATIONS: RoofSeal enables instant
and easy permanent roof repair and waterproofing.
Eternabond's
RoofSeal is an ideal solution for leak repairs on all types of gray
colored roofs.
RoofSeal can also be
used for corrosion protection in tough environments and conditions all
types of roof materials, gutters, awnings, pond liners etc.
The specialized
facing has be proven to be UV stable, even after 16 years in full
sunlight.
RoofSeal's patented adhesive/moisture sealant has an integrated primer which
enables RoofSeal to aggressively and permanently BOND with the surface it
is installed on.
Perfect for re-seaming all roofs, regardless of the
material. Rubber, fiberglass, aluminum, modified, shingle, PVC, TPO, SBS,
PVC, BUR, APP asphalt, steel, hot-tar, etc.
RoofSeal makes a
permanent water-tight seal. RoofSeal provides instant long-term repair of
damaged roofs.
SIZE:
Thickness: 35 +/- 2 mils
Roll Size: 4 inch wide x 50 feet.
Color: Gray
SURFACE PREPARATION:
The surfaces to be sealed must be clean, dry and free
of loose rust, scale, dust, talc and dirt. Any oil, grease, silicone or
other contaminates should be first removed with a suitable
solvent/cleaner.
For older asphalt shingle and granulated cap sheet
roofs, use a stiff brush to remove all loose granules and surface
elements.
APPLICATION:
Install Eternabond RoofSeal by gradually peeling away the plastic release
liner while rubbing the RoofSeal into the surface.
Hint: prevent bubbles under the product by
using your hand to squeegee out air by wiping your hand towards the roll
as you set the tape to the surface.
Overlap RoofSeal from the repair area to a good area
by a minimum of 2 inches. Overlap RoofSeal to RoofSeal seams by a minimum
of 2 inches.
Important: Use a roller
to activate the MicroSealant and permanently set RoofSeal to the surface.
SPECIFICATIONS:
Adhesion: > 9 lbs per inch of width
Elongation: >500%
Tensile Strength: 4500 +/- 500 PSI
Application Temperature with no Primer: 40F to >+150F
Application Temp. with Optional EternaPrime: -25F to +40F
Operating Temperature: -70F to >+200F
Sag Temperature: >200F.
Low Temperature Flexibility: 1/2" radius at -30 degrees F
Pliability: No cracks in membrane
Shelf Life: Up to 5 years
Manufacturers Warranty: 10 Years
COMPOSITION:
Eternabond RoofSeal utilizes Eternabond's advanced MicroSealant
technology. It features a 100% solids proprietary formulation of synthetic
resins, thermoplastics and non-curing rubber (not butyl) and a built-in
primer.
The MicroSealant is bonded to a tough UV stable backing. The
facing side of the MicroSealant is then covered by an easily removed
plastic release liner.
INSTALLATION TOOLS: The tools below
are suggested and will make easy work of this!
|
|
|
|
|