Best Materials Roofing Supplies

1-800-474-7570

 sales@bestmaterials.com

Log-In   Log-Out
Search
FAQ 
                                               ADVANCED SEARCH  FIND MORE ITEMS, QUICKLY
 Shopping Cart:
  0   Items  In Cart
 Total: $0.00
   
   
   
   
   
   
   EPDM  
   Eternabond  
   Fasteners  
   Hardware & LPG  
   Metal Goods  
   Pipe Flashings  
   Roof Coatings  
   Roof Repair  
   Roof Tiles  
   Rope  
   Safety Products  
   Snow Guards  
   Support Systems  
   Tarps  
   TPO & PVC  
   Vents  
   Waterproofing  
 
 
Shop With
 
Confidence
 
 
 
 
 

 
BLACK EPDM Doublestick Seam Tape, 3 inch x 25
 
BLACK EPDM Doublestick Seam Tape, 3 inch x 25' Roll
EPDM-310364
$39.00
 
 Buy 8 or more and pay $31.20 each (save $7.80) 
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: BLACK PEEL/STICK (DOUBLESTICK) EPDM SEAM TAPE. DOUBLE-SIDED BLACK BUTYL RUBBER BASED SEAM / SPLICE TAPE FOR SEAMING ALL TYPES OF EPDM ROOFING. 35 MIL THICK, 3-INCH WIDE X 25 FOOT ROLL. PRICE/ROLL. (order full case quantities for discount)

APPLICATIONS:
Seam Tape is applied between overlapping seams to seal and provide long-term integrity and strength to these areas.
 
DESCRIPTION: WeatherBond EPDM Rubber Seam Tape is a two-sided, cured EPDM/Butyl based polymer adhesive that offers uniform width and adhesive thickness.
 
WeatherBond EPDM Rubber Peel & Stick Seam Tape delivers 30% greater peel strength and 32% greater shear strength when compared to other tapes available in today's marketplace.
Designed for use with WeatherBond EPDM Rubber roofing membranes with Fully-Adhered systems, WeatherBond rubber Peel & Stick Seam Tape is used in conjunction with Multipurpose Primers to fuse EPDM membranes together in the field for long-term splice strength.
 
INSTALLATION:
SEAMING USING SEAM TAPE - The EPDM roofing membrane should be positioned so that the width of the seam is 3”.
 
Remove excess chalk from a chalk line by snapping the line into the air and then chalk a line one-quarter (1/4”) to one half inch (1/2”) from the leading seam edge.
 
Fold the top sheet back to expose the seam area.
 
Using the medium nap paint roller apply the WeatherBond Multipurpose Primer to the seam area using back and forth strokes with moderate pressure until the seam surface attains a smooth black appearance.
 
Apply the WeatherBond Multipurpose Primer past the seam edge to the chalk line. Allow the Primer to flash off.
 
NOTE: If the EPDM membrane is contaminated with dirt, dust, or debris, clean the seam area with Membrane Cleaner or Eternaclean before applying WeatherBond Multipurpose Primer.
 
Unroll the 3” wide Seam Tape along the length of the seam, tape side down, aligning the Seam Tape (not the clear backing) along the chalk line.
 
Using moderate pressure set the Seam Tape into place to keep air from being trapped under the tape.
 
Fold the top membrane onto the Seam Tape release paper. (If the Seam Tape does not visibly extend beyond the leading seam edge, the membrane edge should be cut back to expose one-quarter inch (1/4”) of Seam Tape.)
 
Reaching under the top ply of membrane, pull the release paper away from the Seam Tape at a 45-degree angle to the seam.
 
While removing the paper, draw your hand across the seam, from the back to the leading edge. This will prevent wrinkles and fish mouths from forming in the seam.
 
After the paper is removed, roll the entire length of the seam with a steel or silicone hand roller, first, across the seam, and then the length of the seam.
 
NOTE: When splicing Seam Tape, overlap each piece a minimum of one inch (1”) and firmly roll with a steel or silicone hand roller. Apply lap sealant along the seam’s leading edge 3” in each direction from where the seam tape is spliced together.
 
INSTALLTION SUMMARY:
  • Cut to desired length.
  • Clean surfaces.
  • Prime surfaces
  • Peel off protective coversheet, place onto surface.
  • Roll into surface.
  • Remove Second Backing
  • Cover with topside EPDM layer
  • Roll in
  • Add fully cured COVER STRIP over top of the seamed area if needed to reinforce, or if seam area is smaller or larger than 3 inches.
Technical Data Sheet and Detailed Instructions
 
Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
 
similar terms: doublestick, splice tape, epdm splice tape, splicing tape, epdm splicing tape, epdm seam tape, seam tape, white epdm seam tape, seaming tape, epdm seaming tape
 

  Associated Items:  
 
 
 
BLACK EPDM Coverstrip Tape, 6 inch Wide (Per Foot)
EPDM-309502-1
 
BLACK EPDM-FACED TAPE. HEAVY-DUTY CURED EPDM-FACED PEEL/STICK TAPE WITH BLACK BUTYL RUBBER PEEL-STICK ADHESIVE. SUPER DURABLE! 6 in. WIDE. ORDER BY THE FOOT (up to 100'). PRICE/FOOT. (custom-cut items are non-returnable or cancellable)
 
$7.00 $3.45
Quantity:     Add to Cart
 
 
 
 
 
BLACK EPDM Seam Tape (Doublestick), 3 in. x 25 ft. Roll (1)
EPDM-3035-25
 
BLACK EPDM Seam Tape / Doublestick. Double-sided Black Butyl Rubber Based Seam Tape. For Creating Lap Seams in EPDM. LionGUARD Brand High-Performance Seam Tape. Made in USA. 35 Mil Thick 3-inch Wide X 25 Foot Roll. Price/Roll.
 
$23.00 $11.25
Quantity:     Add to Cart
 
 
 
 
 
EPDM / TPO Multi-Purpose Primer (1G)
EPDM-309510
 
WEATHERBOND MULTI-PURPOSE PRIMER FOR EPDM / TPO ROOFING MEMBRANES. 1G CAN. PRICE/CAN. Flammable. Ground Shipment Only. (6 per case. Order full cases for case discount; UPS ground or truck shipping only)
 
$42.00 $32.95
Quantity:     Add to Cart
 
 
 
 
 
Seam Tape Primer STP700, 1-Pint
EPDM-ST-P700-P
 
Seam Tape PRIMER, STP700. High quality solvent based Primer for EPDM and TPO Seams, Coverstrip or Adhesives. Primer is scrubbed into clean membrane before applying tapes. 1-Pint Can. Price/Can. (see ordering notes in detail view)
 
$18.00 $14.95
Quantity:     Add to Cart
 
 


Shop with
Peace of Mind!