PRODUCT: Emecole Carbon Fiber Reinforcement Accessory Kit for concrete floor cracks. Kit includes 18 carbon fiber stitching dogs, 1 dual-cartridge #555 Polyurea Crack Filler (Net 600 ml), with mixing nozzles. Price/Kit.
DESCRIPTION: Add-on kit for reinforcing cracks where ground movement occurs and recracking needs to be prevented. Add-on kit includes 18 carbon fiber reinforcement stitching dogs (1320 psi tensile) with one tube instant curing Emecole 555 Polyurea and dispensing nozzles. Polyurea material cures very hard within about an hour, and can be ground flat to hide a repaired crack before overcoating. Emecole 555 is environmentally friendly, odor free, less than 1% VOC and no solvents.
1 dual-cartridge sets of Emecole 555 polyurea (net 3600ml material)
18 carbon fiber stiching dogs (1320 psi tensile)
- 2 dispensing mix nozzles and 1 attaching nuts
2 needle-point dispensing tips (for small hairline floor cracks)
- 1 cross-over restrictor
- MSDSs/Product Datasheets
STITCHING DOG INSTALLATION SUMMARY:
After repairing a crack using the Emecole Slab Repair Kit, install a 12 inch long, one and a half inch deep saw cut (depending on the thickness of the concrete) through the crack at a 90 degree angle. Fill saw cut with Emecole 555, install the stitching dog in saw cut while being careful to push it to bottom of the cut. Cap off with additional Emecole 555 to level and the installation is complete. For maximum strength and stability, install stitching dogs at 12 inch intervals.
Email us at email@example.com
or call 1-800-474-7570 / 602-272-8128
You'll get a prompt reply!
similar product terms: carbon fiber, carbon fiber stiching, carbon fiber reinforcement, concrete repair, concrete restoration, instant curing concrete repair, immediate concrete repair, fast concrete repair