0   Items  In Cart
 TOTAL: $0.00

 
AES-475 Sea Armor, Anti-Fouling Flexible Epoxy Coating, GRAY (4G) - AES-475 Sea Armour Anti-Fouling Marine Grade Coating. 2-part Flexible Epoxy Protective Coating System with enhanced Anti-Fouling and Chemical Resistance, GRAY COLOR. 4-Gallon Kit. Price/Kit. (Flammable, Ground or truck shipment only; leadtime 2-4 days)
 
AES-475 Sea Armor, Anti-Fouling Flexible Epoxy Coating, GRAY (4G)
AES-475G-4G
$388.00
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: AES-475 Sea Armour Anti-Fouling Marine Grade Coating. 2-part Flexible Epoxy Protective Coating System with enhanced Anti-Fouling and Chemical Resistance, GRAY COLOR. 4-Gallon Kit (1G A, 3G B). Price/Kit. (Flammable, Ground or truck shipment only; leadtime 2-4 days).

FEATURES:
  • AES-475 SEA-ARMOR is an excellent anti-corrosive protective lining specifically designed for boat bottoms and marine applications. It retains a resilient body, even after final cure. It can be used under constant spillage, immersion conditions, or highly abrasive applications. Custom tints from factory available upoon request (20 gallon min).
  • Highly resistant to acids, solvents, caustics, hydrocarbons, saltwater, freshwater.
  • Survives extreme abrasion and corrosion with excellent outdoor durability.
  • Provides a secure barrier to water penetration, corrosion and buildup of marine matter.
  • Adheres even to damp surfaces without priming.
  • Stays flexible through years of harsh service.
  • Withstands attacks from most chemicals, traffic, and severe environments.
  • Application above and below grade.
  • Withstands ponding water.
  • 100% adhesion of product to substrate
APPLICATIONS: AES-475 SEA-ARMOR is tough and flexible protective epoxy coating. It is a 88% solid Cycloaliphatic Amine resin epoxy is especially designed for use on boat bottoms and other vessels where chemical and marine fouling resistance are required.

An excellent ant-fouling, anti-corrosion protective lining for floors, tank (interior and exterior), pipe lines, boat bottoms, boat decks, vats, etc. Very abrasion resistant.

Can be used above or below grade, in constant immersion condition and in abrasive applications.

APPLICATION METHOD: 3/8 nap phenolic core roller, or spray.

COVERAGE / APPLICATION RATE: READ PRODUCT DATA SHEET AND MSDS SHEETS BEFORE OPENING AND USE. AES-475 can be applied by brush or roller.

A two-coat application is generally recommended to help insure complete protection.

Dry Film Application Rate:
To yield dry film of 8 mils, apply 200 Sq. Ft/gallon
To yield dry film of 16 mils, apply 100 Sq. Ft/gallon

TYPICAL PROPERTIES:
See Product Data Sheet

CURING TIMES:
Pot Life: 1-1/2 hours @ 80°F
Drying Time: 8 hours @ 80°F, complete cure 7 days.

COLOR OPTIONS:
Available standard in Gray. Also available in White and Tan or other color by special order.

PACKAGING OPTIONS:
1-Gallon Kit (1Qt A and 3-Qt B)
4-Gallon Kit (1G A and 3G B)
20 gallon kit (5G A and 15G B)

CAUTIONS: Personal protection required. Read MSDS sheet prior to opening and using.

MORE PRODUCT INFORMATION:
MSDS SHEET
Product Data Sheet

Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
 
similar product terms: anti-fouling, antifouling, marine coating, marine epoxy, salt water coating, boat coating, ship coating, oil field coating, pipeline coating, epoxy coating, Cycloaliphatic Amine resin coating, Cycloaliphatic Amine resin, elastomeric coating, corrosion resistant coating
 



Shop with
Peace of Mind!