Best Materials Roofing Supplies

1-800-474-7570

 sales@bestmaterials.com

Log-In   Log-Out
Search
FAQ 
                                               ADVANCED SEARCH  FIND MORE ITEMS, QUICKLY
 Shopping Cart:
  0   Items  In Cart
 Total: $0.00
   
   
   
   
   
   
   EPDM  
   Eternabond  
   Fasteners  
   Hardware & LPG  
   Metal Goods  
   Pipe Flashings  
   Roof Coatings  
   Roof Repair  
   Roof Tiles  
   Rope  
   Safety Products  
   Snow Guards  
   Support Systems  
   Tarps  
   TPO & PVC  
   Vents  
   Waterproofing  
 
 
Shop With
 
Confidence
 
 
 
 
 

 
PVC Bonding Adhesive, Low VOC Solvent-Based (5G) - WEATHERBOND PVC BONDING ADHESIVE, LOW VOC SOLVENT-BASED. COVERAGE: 60 sqft/G. 5-GALLON CAN. PRICE/CAN. (Flammable item. UPS Ground or Truck Shipment Only)
 
PVC Bonding Adhesive, Low VOC Solvent-Based (5G)
PVC-309126
$191.00 SALE $175.95
(Savings: $15.05)
 
 Buy 18 or more and pay $173.95 each (save $17.05) 
 Buy 36 or more and pay $0.00 each (save 1905.00%) 
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: WEATHERBOND LOW VOC SOLVENT BASED PVC BONDING ADHESIVE. COVERAGE: 60 sqft/G. 5-GALLON CAN. PRICE/CAN.
 
(Flammable item. UPS Ground or truck Shipment Only. 45 cans/pallet.
 
DESCRIPTION:
WeatherBond Low VOC (<250) Solvent Based Bonding Adhesive is a high strength solvent-based contact adhesive that allows quick bonding of PVC membrane to various substrates. It is specially formulated using a blend of VOC exempt and non-exempt solvents to be in compliance with the state of California Clean Air Act of 1988 (updated in 1997) and as further regulated by California’s Air Quality Control Districts listing VOC grams per liter limitations. This product also meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives.
 
See Product Data Sheet (below) for details application methods.
 
Low VOC Bonding Adhesive is designed for bonding WeatherBond PVC Membranes, Carlisle TPO OR EPDM membrane, Versico PVC membranes, and similar PVC membranes to various substrates.
 
COVERAGE RATES:
About 60 square feet (56 sq m) per gallon (finished surface).
 
Porous and irregular surfaces and substrates may require more bonding adhesive than the typical coverage rate.
 
CAUTIONS:
1. Read the Material Safety Data Sheet for complete safety information prior to use.
 
2. WeatherBond Bonding Adhesive is FLAMMABLE - It contains solvents that are dangerous fire and explosion hazards when exposed to heat, flame or sparks. Store and use away from all sources of heat, flame or sparks. Do not smoke while applying. Do not use in a confined or unventilated area. Vapors are heavier than air and may travel along ground to a distant ignition source and flash back. A red caution label is required when shipping.
 
3. Avoid breathing vapors. Keep container closed when not in use. Use with adequate ventilation. If inhaled, remove to fresh air. If not breathing, perform artificial respiration. If breathing is difficult, give oxygen. Call a physician immediately. During application, efforts must be made to prevent fumes from entering the building via air ventilation ducts. Do not place open containers or mix adhesive near fresh air intake units. When possible, shut down or seal off the closest units
.
4. If swallowed, DO NOT INDUCE VOMITING. Call a physician immediately.
 
5. Avoid contact with eyes. Safety glasses or goggles are recommended. If splashed in eyes, immediately flush eyes with plenty of clean water for at least 15 minutes. Contact a physician immediately.
 
6. Avoid contact with skin. Wash hands thoroughly after handling. In case of contact with skin, thoroughly wash affected area with soap and water. Note: Solvent resistant Hycron gloves are recommended when using this product to protect hands from irritating ingredients.
 
7. Do not thin Bonding Adhesive. Thinning will affect performance. Excessively thick or gelled material should be discarded.
 
READ SHEETS BEFORE USE.
PRACTICE YOUR TECHNIQUE BEFORE USE:

Technical Data Sheet
 
MSDS Sheet
 
Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
 
tags / similar product terms: PVC adhesive, PVC glue, pvc roof glue, pvc roof membrane glue, pvc roof membrane adhesive, pvc roof adhesive, pvc plastic roof adhesive
 

  Associated Items:  
 
 
 
4 in. Diameter Spiral / Ribbon Mixer
46565
 
4 in. DIAMETER SPIRAL / RIBBON MIXER WITH 23-1/2 in. LONG SHAFT (FOR 5G BUCKETS). FITS 1/2 INCH DRILL. PRICE/EACH.
 
$10.60 $7.95
Quantity:     Add to Cart
 
 
 
 
 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (1G)
LUCAS-8800-1
 
Universal Bonding Adhesive 8800 by Lucas. Low VOC Water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete and most roofing substrates. 1-Gallon Pail. Price/Pail.
 
$42.00 $30.95
Quantity:     Add to Cart
 
 
 
 
 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (5G)
LUCAS-8800-5
 
Universal Bonding Adhesive 8800 by Lucas. Low VOC Water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete and all types of roofing insulation. 5-Gallon Bucket. Price/Bucket.
 
$198.00 $141.95
Quantity:     Add to Cart
 
 


Shop with
Peace of Mind!