0   Items  In Cart
 TOTAL: $0.00

 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (5G) - Universal Bonding Adhesive 8800 by Lucas. Low VOC Water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete and all types of roofing insulation. 5-Gallon Bucket. Price/Bucket.
 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (5G)
LUCAS-8800-5
$200.00 SALE $146.95
(Savings: $53.05)
 
 Buy 6 or more and pay $140.77 each (save $59.23) 
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: Universal Bonding Adhesive 8800 by Lucas. Low VOC Water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to roofing substrates. 5-Gallon Pail. Price/Pail.

DESCRIPTION: Lucas #8800 Universal Bonding Adhesive is manufactured from strong, elastic, low Tg polymer resins and special additives in a water vehicle. #8800 exhibits permanent strong adhesion. Fast drying with an aggressive tack, #8800 bonds instantly without the risk of fire associated with flammable solvent based adhesives. VOC compliant in all areas. CAUTION: Must keep from freezing before use. In cold conditions, a Solvent Based product is recommended (see LG-BA10 link below).

APPLICATIONS:
  • LOCATIONS: Can be used in all geographic locations. Water Based Low VOC adhesive, suitable for all locations. Can be air shipped.
  • MEMBRANES: Secures EPDM, TPO, PVC and other single-ply membranes. No primer is required to fresh clean surfaces.
  • SUBSTATES: Suitable for use on Polyisocyanurate, Recovery Board, Dens Deck Prime, OSB, Plywood, Metal, Foam, Cellular lightweight concrete, and Structural Concrete.
  • REPLACES: Used to replace solvent-based, low VOC and other water-based adhesives systems.
COVERAGE: Using a 1/2" nap roller, about 60-100 sq.ft. per gallon on most surfaces (120-200 sq.ft./gallon per side).

INSTALLATION: Its applied to both membrane and substrate; allowed to dry until no longer wet to touch; then two tacky surfaces are carefully mated together; then the membrane is rolled to fuse surfaces.
  • Stir until settled material or phased liquid is redistributed and the adhesive is uniform in color.
  • Apply adhesive to the substrate in a uniform manner avoiding globs, puddles, and uncoated areas
  • FLEECEBACK INSTALLS: When adhering fleece back it is a 2 gallon per square wet dump. The fleeceback products are then set directly into the wet adhesive.
  • LIMITATIONS: Temperature needs to be 40F degrees and rising (day & night) and humidity less than 90%.
  • Application methods:
    • Squeegee Application - Apply with a 1/8” notched squeegee to attain specified coverage rate.
    • Roller Application - Use a medium nap roller (1/2")
    • Spray Application - Follow the manufacturer's safety and use procedures.
      • Tip sizes between .019"-.023" in a Graco 510 gun.
      • A minimum fluid pressure of 2,500 psi is required for a fair pattern.
      • Back rolling is recommended.
      • Flush with water at the end of the day.

ADDITIONAL INFORMATION:

Product Data Sheet
MSDS Sheet
General Instructions for Use
Video Link

Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!


similar product terms: epdm adhesive, tpo adhesive, pcv adhesive, single ply adhesive, single ply membrane adhesive, water based bonding adhesive, insulation board adhesive, solvent free membrane adhesive, low voc membrane adhesive, low voc roofing adhesive
 

  Associated Items:  
 
 
 
2 in. Diameter Spiral / Ribbon Mixer
46555
 
2 in. DIAMETER SPIRAL / RIBBON MIXER WITH 16 in. LONG 3/8 in. HEX SHAFT (FOR 1-5G BUCKETS). FITS 3/8 DRILLS. PRICE/EACH.
 
$9.60 $6.95
Quantity:     Add to Cart
 
 
 
 
 
35 Lb 16 inch Wide Steel Membrane Roller
ROLLER-170-16S35
 
35 LB STAND-UP 16 INCH WIDE STEEL MEMBRANE ROLLER. USED FOR ROLLING ADHERED EPDM / ADHERED ROOFING MEMBRANES, VINYL / LINOLEUM FLOORS ETC. 3 FLOATING POLISHED-STEEL ROLLERS. HEAVY-DUTY CONTRACTOR GRADE CONSTRUCTION. PRICE/EACH.
 
$200.00 $159.95
Quantity:     Add to Cart
 
 
 
 
 
5 ft. Hard Wood Handle with Metal Threaded Tip (1)
H60MT-WP05FMT
 
5 Foot Hardwood Handle, Metal Threaded Tip. Strong 15/16 x 60 inch long #1 hardwood handle, Lacquer Finish, with metal threaded tip. Fits standard paint rollers and brooms. Price/Each.
 
$5.00 $4.55
Quantity:     Add to Cart
 
 
 
 
 
9 Inch Paint Roller Cover, Solvent Resistant, 1/2 Nap (1)
9AP050
 
Paint Roller Cover, 9-inch, 1/2 inch nap, 1-1/2 ID, Solvent Resistant Polyester Nap and Core. For use with all types of coatings including solvent based coatings, epoxies and urethanes. Price/Each.
 
$2.00 $1.45
Quantity:     Add to Cart
 
 
 
 
 
EPDM Bonding Adhesive, LG-BA10, High Strength (5G)
EPDM-LG-BA10-5
 
EPDM Bonding Adhesive, LionGuard LG-BA10. High-strength neoprene / solvent based contact adhesive. Use with EPDM Rubber Roofing. 5-Gallon Pail. Price/Pail. (flammable item; UPS Ground or Truck Shipment Only; Cannot ship to VOC restricted areas)
 
$152.00 $116.95
Quantity:     Add to Cart
 
 
 
 
 
Epoxy Primer, Clear 1-Part Waterbased Penetrating Primer (1G)
UNISEAL-PRIMER-1G
 
Epoxy Primer, Clear Waterbased 1-Part Penetrating Primer (formerly Uniseal Primer). For concrete or asphalt. Penetrates and seals porous substrates to improve adhesion of topcoats. Dries Semi-Clear. 1-Gallon Pail. Price/Pail. (gaf # 890541000)
 
$45.00 $37.95
Quantity:     Add to Cart
 
 
 
 
 
Lucas Solvent Seam Cleaner for Membrane, 14 oz. Can
LUCAS-5025
 
Lucas #5025 Solvent Cleaner (low VOC) for Roofing Membrane Seams. Used for cleaning/washing and preparing seam areas on all types of roofing membranes prior to application of seam tapes or bonding cements. 14 Oz. Aerosol Can. Price/Can. (UPS Groud Only)
 
$11.00 $7.95
Quantity:     Add to Cart
 
 
 
 
 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (1G)
LUCAS-8800-1
 
Universal Bonding Adhesive 8800 by Lucas. Low VOC Water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete and most roofing substrates. 1-Gallon Pail. Price/Pail.
 
$42.00 $30.95
Quantity:     Add to Cart
 
 
 
 
 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (1-Qt)
LUCAS-8800-QT
 
Universal Bonding Adhesive 8800 by Lucas. Low VOC, Water based, contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to most roofing substrates. 1-Quart Can. Price/Can.
 
$16.00 $11.95
Quantity:     Add to Cart
 
 
 
 
 
Paint Roller Frame, 9 Inch, Heavy Duty
900-516
 
Paint Roller Frame, 9 Inch Wide, Heavy Duty with 5 Wire Frame, 5/16 Inch Stem, Steel Reinforced Threaded Handle. Price/Each.
 
$4.00 $2.35
Quantity:     Add to Cart
 
 
 
 
 
Squeegee 18 x 1/8 Serrated Gray EPDM in Steel Frame (1)
61418
 
Squeegee, 18 Inch Wide Wide X 1/8 Serrated (v-notched) Gray EPDM Rubber Straight Squeegee. Replaceable Blade Set In Steel Frame. Recommended For Use With Deck Coatings. Price/each.
 
$22.00 $15.95
Quantity:     Add to Cart
 
 
 
 
 
Wet Lay EPDM Bonding Adhesive, ChemLink SinglePly, 5-Gal.
F1702
 
ChemLink Single-Ply EPDM Adhesive. Allows Wet Lay of EPDM to wood decks and some other roofing substates. Solvent Free, meets VOC requirements in all areas. 5-Gallon Pail. Price/Pail. (see special ordering notes in detail view)
 
$341.00
Quantity:     Add to Cart
 
 


Shop with
Peace of Mind!