0   Items  In Cart
 TOTAL: $0.00

 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (1-Qt) - Universal Bonding Adhesive 8800 by Lucas. Low VOC, Water based, contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to most roofing substrates. 1-Quart Can. Price/Can.
 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (1-Qt)
LUCAS-8800-QT
$16.00 SALE $11.95
(Savings: $4.05)
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: Universal Bonding Adhesive # 8800 by Lucas. Low VOC, Water based, contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to roofing substrates. 1-Quart Can. Price/Can.

DESCRIPTION: Lucas #8800 Universal Bonding Adhesive is manufactured from strong, elastic, low Tg polymer resins and special additives in a water vehicle. #8800 exhibits permanent strong adhesion. Fast drying with an aggressive tack, #8800 bonds instantly and without the risk of fire associated with flammable solvent based adhesives. VOC compliant in all areas.
CAUTION: Must keep from freezing before use. In cold conditions, a Solvent Based product is recommended (see LG-BA10 link below). Packaging: 12 quarts/Case. 36 cases/pallet.

APPLICATIONS:
  • LOCATIONS: All Geographic Locations. Water Based Low VOC adhesive, suitable for all locations. Can be air shipped.
  • MEMBRANES: Secures EPDM, TPO, PVC and other single-ply membranes. No primer is required to fresh clean surfaces.
  • SUBSTATES: Suitable for use on Polyisocyanurate, Recovery Board, Dens Deck Prime, OSB, Plywood, Metal, Foam, Cellular lightweight concrete, and Structural Concrete.
  • REPLACES: Used to replace solvent-based, low VOC and other water-based adhesives systems.
COVERAGE: Using a 1/2" nap roller, about 60 to 100 sq.ft. per gallon on most surfaces (120-200 sq.ft./gallon per side).

INSTALLATION: Its applied to both membrane and substrate; allowed to dry until no longer wet to touch; then two tacky surfaces are carefully mated together; then the membrane is rolled to fuse surfaces.
  • Stir until settled material or phased liquid is redistributed and the adhesive is uniform in color.
  • Apply adhesive to the substrate in a uniform manner avoiding globs, puddles, and uncoated areas
  • FLEECEBACK INSTALLS: When adhering fleece back it is a 2 gallon per square wet dump. The fleeceback products are then set directly into the wet adhesive.
  • LIMITATIONS: Temperature needs to be 40F degrees and rising (day & night) and humidity less than 90%.
  • Application methods:
    • Squeegee Application - Apply with a 1/8” notched squeegee to attain specified coverage rate.
    • Roller Application - Use a medium nap roller (1/2") 
    • Spray Application - Follow the manufacturer's safety and use procedures.
      • Tip sizes between .019"-.023" in a Graco 510 gun.
      • A minimum fluid pressure of 2,500 psi is required for a fair pattern.
      • Back rolling is recommended.
      • Flush with water at the end of the day.

ADDITIONAL INFORMATION:

Product Data Sheet
MSDS Sheet
General Instructions for Use
Video Instructions for Use

Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!


similar product terms: epdm adhesive, tpo adhesive, pcv adhesive, single ply adhesive, single ply membrane adhesive, water based bonding adhesive, insulation board adhesive, solvent free membrane adhesive, low voc membrane adhesive, low voc roofing adhesive
 

  Associated Items:  
 
 
 
3M 7447 Scotch Brite Pad, Maroon Color, Very-Fine (1)
3M-7447-1
 
3M Scotch-Brite Pad, Maroon Color, Very-Fine Grade for General Purposes. Pad size 6 x 9 inch. Price/Pad.
 
$2.00 $1.45
Quantity:     Add to Cart
 
 
 
 
 
9 Inch Paint Roller Cover, Solvent Resistant, 1/2 Nap (1)
9AP050
 
Paint Roller Cover, 9-inch, 1/2 inch nap, 1-1/2 ID, Solvent Resistant Polyester Nap and Core. For use with all types of coatings including solvent based coatings, epoxies and urethanes. Price/Each.
 
$2.00 $1.45
Quantity:     Add to Cart
 
 
 
 
 
Lucas Solvent Seam Cleaner for Membrane, 14 oz. Can
LUCAS-5025
 
Lucas #5025 Solvent Cleaner (low VOC) for Roofing Membrane Seams. Used for cleaning/washing and preparing seam areas on all types of roofing membranes prior to application of seam tapes or bonding cements. 14 Oz. Aerosol Can. Price/Can. (UPS Groud Only)
 
$11.00 $7.95
Quantity:     Add to Cart
 
 
 
 
 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (1G)
LUCAS-8800-1
 
Universal Bonding Adhesive 8800 by Lucas. Low VOC Water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete and most roofing substrates. 1-Gallon Pail. Price/Pail.
 
$43.00 $31.95
Quantity:     Add to Cart
 
 
 
 
 
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (5G)
LUCAS-8800-5
 
Universal Bonding Adhesive 8800 by Lucas. Low VOC Water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete and all types of roofing insulation. 5-Gallon Bucket. Price/Bucket.
 
$204.00 $149.95
Quantity:     Add to Cart
 
 
 
 
 
Single-Ply Primer, LVOC, 2-OZ. (UPS ground ship only)
PRIMER-SP-LVOC-2
 
Single-Ply Primer, LVOC (low VOC). A solvent based primer designed to clean and prime EPDM, TPO and PVC membranes prior to attaching butyl adhesive Seam-Tape or Cover-Strip products. 2-Oz. Bottle. Price/Bottle. (flammable; UPS ground ship only)
 
$7.00 $4.75
Quantity:     Add to Cart
 
 


Shop with
Peace of Mind!