0   Items  In Cart
 TOTAL: $0.00

 
Lucas #9600 Joint Sealant, TAN Color, 10 oz. (1) - Lucas #9600 Joint and Termination Sealant, TAN Color. 100% Solids, 400% Elogation, 400 PSI Tensile, Fast Curing Hybrid Polyurethane. For Roof, Walls, Door, Windows, Siding. Similar to NP1. 10 oz. Tube. Price/Tube.
 
Lucas #9600 Joint Sealant, TAN Color, 10 oz. (1)
LUCAS-9600-T-1
$6.00 SALE $4.35
(Savings: $1.65)
 
 Buy 12 or more and pay $4.20 each (save $1.80) 
 Buy 48 or more and pay $3.89 each (save $2.11) 
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
  PRODUCT: Lucas #9600 Joint and Termination Sealant, TAN / WICKER Color. 100% Solids, 400% Elogation, 400 PSI Tensile, Fast Curing Hybrid Polyurethane. For Roof, Walls, Door, Windows, Siding. Similar to NP1. 10 oz. Tube. Price/Tube.

FEATURES:
  • 400 psi Tensile and 400% Elongation.
  • 100% Solids, Non-Shrinking, Urethane Based Chemistry.
  • +/- 35% Joint Movement Rated.
  • Paintable in 24 hours.
  • Good Adhesion and Workability.
  • Can be applied down to 32F. Cure is moisture activated.
  • Low VOC and very low odor - can be used interior or exterior.
  • Maximum Joint Size: 2" wide x 1" deep.
DESCRIPTION:
Lucas 9600 is a 100% solids moisture cure modified urethane adhesive/sealant. Primarily intended for sealing large joints and termination bars. This adhesive contains no solvents or other volatile ingredients and will not shrink. Outstanding adhesion to metal, concrete, masonry, wood, EPDM, PVC, vinyl surfaces, silicone surfaces, and most other common building materials. Lucas 9600 sealant has minimal odor and has less than 10 grams per liter VOC.

APPLICATION:
To use this product cut the tip to the desired size and puncture the foil seal. Small orifice size and/or an incompletely punctured seal may cause material to extrude around the plunger. Surface to be sealed must be clean. Maximum recommended joint width is 2 inches. Maximum recommended depth is 1 inch. Use backer rod for > 1/4" joints. Coverage rate is approximately 25 ft per 10 oz. cartridge for a 1/4 x 1/4 inch bead.

Lucas #9600 is paintable after 24 hours. Application below 32ºF (0º C) is possible however curing requires free moisture in the air and will not begin until the temperatures are above freezing. In cold weather, product should be stored indoors before using.

MORE PRODUCT INFORMATION:
MSDS Sheet
Product Data Sheet
LUCAS Color Chart

Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!


similar product terms: lucas 9600 sealant, roofing sealant, concrete sealant, epdm sealant, joint sealant, roofing joint sealant
 



Shop with
Peace of Mind!