PRODUCT:
#9 MASTER FLASH BLACK EPDM BOOT. 25x25" BASE, 6" HIGH. FITS 10" - 18" (254mm to
467mm) PIPES. PRICE/EACH.
FEATURES:
Flexible Base
Design
Sealing tightly with sealant and almost any type of fastener, the flexible
base is virtually compatible with any roofing material -- metal, plastic,
asphalt, tile, rubber membrane, and more.
Uniform Plumbing Code (UPC) Listed
Master Flash was used to create a new engineering standard for profiled
roofing by the International Association of Plumbing and Mechanical Officials
(for the Uniform Plumbing Code).
Resilient Design
Master Flash performance is unaffected by:
• Ice/snow
• Hail stones
• Vibration
• Expansion/Contraction
Environment Control
Master Flash provides a permanent seal that controls gaseous or liquid
environments to eliminate leakage and odor contamination.
Corrosion-Resistant Base
Master Flash base is made of heavy-duty aluminum alloy for flexibility and
corrosion resistance.
Roof Pitch-Adaptability
The stepped-cone design makes Master Flash easily adaptable to most roof
pitches.
APPLICATIONS:
* Plumbing, heating/air conditioning vents and equipment
* Electrical service entrances
* Solar collection pipes
* Grain augers
* TV aerials
* Masts, vents or pipes through decks or
bulkheads
* Lighting conductors
* Pest control
WARRANTY:
Manufacture provides 20 year limited warranty.
INSTALLATION:
SELECT and TRIM... Choose appropriate Master Flash with opening at least 20%
smaller than pipe diameter. If necessary trim opening to 20% smaller than pipe
diameter.
SLIDE... Slide Master Flash down over pipe. (A non-petroleum base lubricant
will ease installation.). Use RETRO-FIT Master Flash where pipe is not
accessible.
FORM... Press Master Flash down, bending it to conform to roof profile or
roof irregularities. A blunt tool will help press flashing into tight roof
angles.
SEAL... Apply a bead of sealant between Master Flash base and roof.
FASTEN... Use exterior grade fasteners with sealing washers to complete
sealing. For UPC installation, fastener spacing may not exceed 1-1/2" (38mm).
|