PRODUCT: Miro Model 16-Base-Strut-7
Rooftop Gang Conduit Support, 16" Wide Unitstrut®, 2.5"- 7" Height Adjustable, with
9 x 15-1/4" Polycarbonate Base. 1-unit. Price/Each.
DESCRIPTION: A pipe stand with a
Unistrut® pipe support system used for ganging roof-mounted gas pipes,
electrical conduit, solar piping and other mechanical piping. Unique
design absorbs thermal expansion and contraction of pipes thus preventing
damage to the roof membrane.
Pipes rest on a 16" length of Unistrut which
is mounted on the Polycarbonate base.
Pipes can then be fastened by
using typical clamps and hardware locked to the Unistrut.
Model 16-Base Strut Base Material:
Strut: 16" x 1-5/8" wide x 13/16" high, 14
gauge, HDG P4100 Unistrut®
Hardware: 3/8" stainless steel rod and
stainless or HDG related hardware
Size: The deck base is 9" by 15-1/4".
Max Pipe Clearance: Can adjust in height
from a low of 2.5" to a high of 7" in elevation above the roof membrane.
Max Load Weight: Maximum load weight may
not exceed 223 lbs. per pipe stand.
Spacing: Manufacturer's recommended spacing
is not to exceed 10 foot centers depending upon the load.
Available in Hot Dipped Galvanized, Stainless Steel, heights of 7 and 12
inches, and widths of 12, 16, and 20 inches.
Email us at
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
similar product terms: unistrut pipe
support, unistrut, unistruct conduit support, Miro, gang pipe support, gang pipe supports, conduit support, conduit supports, condensate support, condensate supports, 12-base-strut, support, miro conduit supports, miro conduit support, roof top conduit support, polycarbonate conduit support, roof-top conduit supports