MIRO MODEL 3-R-4 ROOFTOP PIPE SUPPORT. ROLLER-BEARING PIPE SUPPORT FITS UP TO 3 INCH ID TO 3.75 OD PIPES. PROVIDES EITHER 2 or 4 in. PIPE CLEARANCE UNDER PIPE. CASE of 24. PRICE/CASE.
APPLICATIONS: "Roller-bearing" pipe
support used to support roof-mounted gas pipes, electrical conduit, solar
piping and other mechanical piping. Unique design absorbs thermal expansion
and contraction of pipes thus preventing damage to the roof membrane. Pipes
rest on a polycarbonate resin roller and a rod situated in a polycarbonate
Size: The Pillow Block Pipestand Model 3-R-4
is made in one standard size. The base is 7-3/4" square, the top of the
roller device is 4" high, the top of the cradle is 4" high, and the maximum
width of the interior of the cradle is 3.875 inches.
Max. Pipe Size: 3" inside diameter and 3.75"
Max. Pipe Clearance:
Rod and pipes supported one pipestand high will have a clearance of 4". Optional 3-R spacer increases the clearance of the pipe by 2".
Max. Load Weight: Maximum load weight may not
exceed 79 lbs. per pipestand.
Recommended spacing is not to exceed 10 feet centers depending upon the
load. Make certain each pipestand is properly elevated to even the load
weight on all pipestands.
Other standard sizes available to fit 3 to 6 inch pipes with heights up to
12 inches. Custom configurations also available.
Email us at
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
similar product terms: pipe stand, pipe stands, Miro pipe stand, Miro, pipe support, pipe supports, pipe support systems, grinnell pipe supports, frp pipe supports, fiberglass pipe supports, pipe support bridge, pipe support system, pipe supports for roof, pipe supports for roof installation