Roof Hatch Safety Railing Systems
We carry a complete selection of the highest quality OSHA approved
Roof Hatch Safety Railings
/ Guardrails for Roof Hatches
at the best prices.
NEW: Skynet Safety Nets for Skylights.
Our "zero penetration" guard-rail
safety rail systems meet all OSHA requirements for rooftop openings and requirements for safe egress and ingress through rooftop hatch openings while hatch is in use. These fixed railing systems provides permanent fall protection around
roof top openings, skylights, or fire vents.
Call 1-800-474-7570 / 602-272-8128
You'll get a prompt response !
Our safety rail systems are designed not to damage the roof's base flashing or void your
roof warranty. No drilling into the curb or applying heavy iron bases on
the completed roof system surface is required.
The safety rail systems are available in sizes to fit all brands,
sizes and configurations of
They install quickly with
basic tools and do not require special training or certification for a
Standard Hatch Rail Systems consist of:
1-5/8" OD A53 grade B galvanized steel structural tubing frame.
Meets OSHA Standards 1910.23 and 1910.27.
* Easy clamp-on and bolt-together Installation.
* No Drilling Required, No Penetrations.
* Models and Designs are
available to fit
every roof hatch manufacturer.
* System mounts on the counter
flashing of roof hatches -- will not void manufacturers' warranties.
year manufacturers warranty against all defects in welded
components and against rusting or any deterioration from weather
* 40 inch high
perimeter posts. Installed height above deck is about 52" on most
hatches (depends on roof hatch curb height).
Chain: Zinc plated
3/16"ASTM Proof chain with hoop and rings as required.
Spring chain snaps for easy removal by users.
Connecting Hardware: Zinc plated Hex Head Bolts, Hex Nuts,
* Compression Gasket:
¾” Dow Chemical Co. Styrofoam.
* Railing Clamps:
Models 02, 03, 31, 32, 34 and 40G as required.
* Optional Self
Closing Gate Available.
* Powder Coated "Safety Yellow" to
a thickness of 2 mils -- insures no fading, rusting, and/or
Safety Grab Post.
Self Closing Gates.
Click Product Link Below for Detail
Info, Pricing and to Order
Installation: Field customize to fit existing condition or as
specified herein. Set curb framing gasket around roof opening,
tighten to fit opening. Add the four corner posts into receiver and
bolt to frame. Install cross rails into preset clamps and level
adjust with wrench. Add chain or gate as specified by roof hatch
Fits Hatch Size
(inside dimensions of hatch)
24" x 36" (opens on 24" side)
30" x 30" Universal, Fits all
30" x 36" (opens on 30" side)
30" x 42" (opens on 30" side)
30" x 48" S(opens on 30" side)
30" x 54" (opens on 30" side)
30" x 96" (opens on 30" side)
36" x 36", Universal, Fits All
36" x 48" (opens on 36" side)
36" x 96"
(opens on 36" side)
48" x 48"
48" x 54"
(opens on 48" side)
48 x 96", 48" (opens on 48" side)
EZ-Up Safety Grab Post
Self Closing Gate
Most are available in left-side, right-side, and
Warranty: The manufacturer,
RTA. covers the full system material warranty all cost of repairs and/or
replacement of any components of the system against defects in
manufacturing for a period of seven (7) years. Warranty will not
include Acts of God, vandalism, neglect, metal finish, improper
All products sold are subject to the following
limited warranty. The product is free from defects in material and
workmanship. RTA makes no other representation or warranty of any
kind, express or implied, in fact or in law, including without
limitation, warranty of merchantability or the warranty of fitness for
a particular purpose, other than the limited warranty set forth. Every
claim under this warranty shall be deemed waived unless made in
writing and received by RTA within thirty (30) days of the date the
defect to which each claim relates is discovered or should have been
Limitations of liability is expressly understood and
agreed that the limit of RTA liability shall be re-supply of a like
quantity of non defective product and that RTA shall have no such
liability except where the damage or claim results solely from breach
of manufacturers Warranty. RTA shall not be liable for any incidental,
consequential or other damages for any alleged negligence, breach of
warranty, strict liability or any other theory, other than the limited
liability set forth above.
Maintenance: Normal maintenance is not required.
However, semi-annual inspection by the owner is required as part of
the warranty. Inspection shall include checking frame alignment, check
that all nuts, bolts, and clamps are tight, weight distribution, and
improper installation causing damage or failure. Any failure of the
product must be reported in writing within this period.
SKYLIGHT SAFETY NET
Designed to prevent workers from falling
through. Can be used for either temporary or permanent applications.
Constructed with Powder Coated Steel framing and UV resistant Heavy
Duty Netting, . Suitable for permanent or re-useable applications
(optional permanent-mount clips available).
All Skynet Products
6x12 (fits 4x8)
Skynet Product Datasheet
RELATED SAFETY PRODUCTS:
Roof Hatch Inventory
Show More Popular Products and Suppliers:
Popular Products and Pages:
Caulk & Sealants,
Caulk Gun, Bulk,
Concrete Stain &
Confined Space Rescue,
Diamond Saw Blades,
Drain Downspouts / Nozzles,
Roof Drain Domes,
Drains-Retrofit / Reroof,
Electric Hot Air
Gas & Safety Cans,
Hot Tar Kettles,
Log Home Products,
Narrow Crown Stainless,
Propane Hot Air
Roof Leak Repair,
Roof Paints & Coatings,
Roof Repair Materials,
RV & Trailer Roof
RV Roof Replacement,
Safety Rail Systems,
Spray Polyurethane Foam,
Vents, Roof Vents,
Wood Deck Hardware,
Popular Suppliers Include: