PRODUCT: Miro Model 3-RAH-7 Rooftop Pipe Support. 2.75 to 7 inch Height Adjustable, Roller Pipe Supports for 3 inch Pipes. 7x10 inch Polycarbonate Base. Case of 12. Price/Case. This item was replaced with # Miro-3-RAH-8-1
APPLICATIONS: "Roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping.
Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller.
The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel.
Pipestand will accommodate up to 3" pipe (inside diameter) or up to 3 3/4" (outside diameter) pipes.
Materials: Base is polycarbonate. All metal parts are made from stainless steel.
Size: The deck base is 9" by 15.25" and has a maximum cradle width of 4".
Max. Pipe Size: 3" inside diameter and 3.75" outside diameter.
Max. Pipe Clearance: The 3-RAH can adjust in height from a low of 2.75" to a high of 7" in elevation above the roof membrane.
Max. Load Weight: Maximum load weight may not exceed 115 lbs. per pipestand.
Spacing: Recommended spacing is not to exceed 10 feet centers depending upon the load. Make certain each pipestand is properly elevated to even the load weight on all pipestands. Do not exceed 100 lbs. per pipestand.
Other standard sizes available to fit 3 to 6 inch pipes with heights up to 12 inches. Custom configurations also available.
Email us at email@example.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
similar product terms: pipe stand, pipe stands, Miro pipe stand, Miro, pipe support, pipe supports, pipe support systems, grinnell pipe supports, frp pipe supports, fiberglass pipe supports, pipe support bridge, pipe support system, pipe supports for roof, pipe supports for roof installation