#6RT-S #RT-6 Rectangular Based RED SILICONE Pipe Flashing. Base Size: 24.5 x 28.2 Inch with Open Top. Fits: 14-3/8 to 21-1/2 inch pipes. Price/Each.
SILICONE MATERIAL FOR
HOT PIPES, CHIMNEY PIPES, CHEMICAL PIPES, EXTREME ENVIRONMENTS AND SERVICE (-100F to +437F) .
Sealing tightly with sealant and almost any type of fastener, the flexible
base is virtually compatible with any roofing material -- metal, plastic,
asphalt, tile, rubber membrane, and more.
Silicone pipe flashing is unaffected by:
• Hail stones
Provides a permanent seal that controls gaseous or liquid
environments to eliminate leakage and odor contamination.
The stepped-cone design adapts to most roof
pitches. Increase one size larger for higher pitch roofs.
* Hot Pipes, stove pipes, chemical pipes
* Plumbing, heating/air conditioning vents and equipment
* Electrical service entrances
* Solar collection pipes
* Grain augers
* TV aerials
* Masts, vents or pipes through decks or
* Lighting conductors
* Pest control
SELECT and TRIM... Choose appropriate opening at least 20%
smaller than pipe diameter. If necessary trim opening to 20% smaller than pipe
SLIDE... Slide down over pipe. (A non-petroleum base lubricant
will ease installation.). Use RETRO-FIT boot where pipe is not
FORM... Press down, bending it to conform to roof profile or
roof irregularities. A blunt tool will help press flashing into tight roof
SEAL... Apply a bead of sealant between base and roof.
FASTEN... Use exterior grade fasteners with sealing washers to complete
sealing. For UPC installation, fastener spacing may not exceed 1-1/2" (38mm).
similar product terms: springseal spring seal, pipe flashing, astec washer, master flash, masterflash, masterflash, silicone masterflash, silicone master flash, master flash silicone boot, masterflash silicone boot, silicone pipe flashing, silicone pipe boot, flashing boot, masterflash, silicone flashing boot, pipe flashing, vent pipe flashing, vent pipe roof flashing, chimney pipe boot, heater pipe boot, stove pipe boot, stove pipe flashing, hot pipe flashing