#7 Round Base RED Silicone Pipe Flashing - #7 ROUND BASE RED SILICONE PIPE FLASHING. 14.6 Inch DIAMETER BASE. OPEN TOP. FITS 6 Inch to 11 Inch PIPES. PRICE/BOOT.
 
#7 Round Base RED Silicone Pipe Flashing
7RS
$94.00 SALE $39.95
(Savings: $54.05)
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 

Product:

#7 Round Base Red Silicone Pipe Flashing. 14.6" Diameter Base. Open Top. Fits 6" To 11" Pipes. Price/Each Boot (10 boots/case).

Ordering Notes:

  • Shipping leadtime: 1-2 business days.

Description:

Flexible Base Design: Sealing tightly with sealant and almost any type of fastener, the flexible base is virtually compatible with any roofing material -- metal, plastic, asphalt, tile, rubber membrane, and more.

Resilient Design - Performance is unaffected by: Ice/snow, Hail stones, Vibration, Expansion/Contraction.

Environment Control: Provides a permanent seal that controls gaseous or liquid environments to eliminate leakage and odor contamination.

Corrosion-Resistant Base: Made of heavy-duty aluminum alloy for flexibility and corrosion resistance.

Roof Pitch-Adaptability: The stepped-cone design makes flashing easily adaptable to most roof pitches

Applications:

  • Hot Pipes, Heater Pipes, Stove Pipes, Gas Vent Pipes
  • Chemical Pipes, Corrosive environments
  • Extreme Service Environments.
  • Plumbing, heating/air conditioning vents and equipment
  • Electrical service entrances
  • Solar collection pipes
  • Grain augers
  • TV aerials
  • Masts, vents or pipes through decks or bulkheads
  • Lighting conductors
  • Pest control

Warranty:

Manufacture provides 20 year limited warranty.

Installation:

SELECT and TRIM... Choose appropriate size opening at least 20% smaller than pipe diameter. If necessary trim opening to 20% smaller than pipe diameter.

SLIDE... Slide down over pipe. (A non-petroleum base lubricant will ease installation.). Use RETRO-FIT Flashing where pipe is not accessible.

FORM... Press down, bending it to conform to roof profile or roof irregularities. A blunt tool will help press flashing into tight roof angles.

SEAL... Apply a bead of sealant between Master Flash base and roof and at top edge to pipe.

FASTEN... Use exterior grade fasteners with sealing washers to complete sealing. For UPC installation, fastener spacing may not exceed 1-1/2" (38mm).

Questions?

Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!

similar product terms: df207re, df207, deks, silicone flashing boot, silicone boot, silicone pipe flashing, lightning rod insulator, lightning conductor insulator, lighting insulation, lightning electrical insulator, metal roof lighting insulator, metal roof insulator, insulator, retrofit flashing boot, roof flashing boot, pipe flashing boot, roof pipe flashing boot, roof flashing
 

  Associated Items:  
 
 
 
#7 BLACK SILICONE Rubber Square-Base Flashing Boot
SQ7-SB
 
#7 BLACK SILICONE Rubber Flashing Boot, 14.1 x 14.1 Inch Square-Base, 5-3/8 High, 5 inch Open Top. Fits 6 to 11 inch OD Pipes/Rods (152 - 280mm). Price/Each.
 
$90.00 $39.95
Quantity:     Add to Cart
 
 
 
 
 
#9 X 1 Stainless HWH Evergrip Screw, w/Bond Seal Washer (1)
WS9X1HWH-NEO-SS-1
 
#9 X 1 INCH STAINLESS STEEL EVERGRIP HWH SHARP-POINT SCREW WITH BOND SEAL WASHER. PRICE/1. (SFS #E4160-CU)
 
$0.40 $0.28
Quantity:     Add to Cart
 
 
 
 
 
ASI-600 High-Temperature Silicone Sealant/Gasket, RED
ASI-HT-R
 
ASI-600 High Temperature 600F Silicone Sealant / Gasket Material. Suitable for intermittant to 600°F (310°C), continuous 500°F. Color: RED. 10.1 Oz Tube. Price/Tube. (24/case. Order full cases for extra discounts)
 
$11.00 $8.85
Quantity:     Add to Cart
 
 

A CSG Group Company


Shop with
Peace of Mind!

 

 

EV SSL