PRODUCT: 3 inch x 150 Foot Roll, Yellow Resin Coated Fiberglass Reinforecement Fabric. 10 x 20 Mesh. Meets ASTM D 1668 Type III. 24 Rolls/Case. Price/Case. (1-2 week leadtime)
FEATURES:
*
Yellow fiberglass resin coated
glass fabric
* Glass
membrane / woven fabric, 2 oz., 10 X 20 mesh, made with flexible filaments of
glass
* Tensile strength of 75 lb/in. for stability and durability
* Acid and
heat-resistant
*
Will not rot or decay.
*
Special yellow resin coating on
the fabric is compatible with asphalt, coal tar
cements and coatings, emulsions, solvent-based, and hot-melt types.
*
High
visibility yellow color enables roofers to see if coverage is complete and aids quality
workmanship.
APPLICATIONS:
*
YELLOW FIBERGLASS FABRIC is designed to
reinforce plastic roof cement, wet or dry elastomeric flashing cement and
coating when used in roof repair work, for flashings, and for sealing seams in
metal and composition roofs.
*
Used in below-grade waterproofing
applications, tank lining systems, and for waterproofing planter boxes.
*
Can be used with either hot bitumen, cold
coatings, asphalt, tar, and various resin coatings.
*
Woven non-hygroscopic, lightweight, high
tensile strength, bi-directional fabric will not rot, tear or wear.
* Allows a high bitumen to fiber ratio to be
achieved in a built-up roofing system.
*
Can be used with hot bitumen, cold coatings,
asphalt, coal tar, resinous coatings, cements and adhesives.
*
Excellent repair fabric for both new and old
construction in roofing and waterproofing applications.
*
Other applications include: foundations,
slabs, tunnels, subways, pipeline joint wrap, parapet wall treatment, tennis
courts, plaza decks, HVAC, insulation and stucco.
TYPICAL USE GUIDELINE (see coating suppliers data
sheet for specifics):
1.
Apply roof cement to approximately 1.8" thick
(or a coating to about 1/16")
2.
Embed fiberglass smoothly without wrinkles or
buckles.
3.
Top coat fabric with roof cement (or coating)
to the same thickness as the first layer, making sure the glass is entirely
covered.
CAUTION: Use gloves and other protective clothing when
handling this product.
TESTING SPECIFICATIONS:
ASTM D-1668-86 Type 1
Federal. Specification: HH-C466
TYPICAL
PROPERTIES / DATA SHEET:
* Oz. sq./yd: 2.00
* Thread Count per Inch: 20 x 10 (+/-1)
* Thickness: 0.005 inch average
*
Tensile Strength:
- Warp
(lbs./lineal inch): 75
- Fill (lbs./lineal inch):
75
TECHNICAL DATA SHEET
LIMITED WARRANTY:
Product is warranted by manufacturer to be free of defects for 90 days from
date of purchase. No other warranties apply since many factors affect the
results obtained (problems with cement or coating, surface conditions,
weather, workmanship, and equipment utilized). Proof of purchase required.
Terms of our other purchase conditions apply.
Questions?
Email us at
sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
similar terms: web, SJT, straight jacket tape, tape,
fiberglass web, fiberglass tape, fiberglass cloth, fiberglass reinforcement,
reinforcement fabric, reinforcement cloth, reinforcement web, joint cloth,
roofing cloth, roofing web, roofing tape
|