Pro TPO Bonding Adhesive (5G) - WEATHERBOND PRO TPO BONDING ADHESIVE, SOLVENT BASED. 5-GALLON CAN. PRICE/CAN. (special order, Flammable item. UPS Ground or Truck Shipment Only. Cannot ship to SCAQMD or resticted VOC areas)
Pro TPO Bonding Adhesive (5G)
$225.00 SALE $175.95
(Savings: $49.05)
 Buy 6 or more and pay $146.25 each (save 35.00%) 
  Order Options:  
  Add To Cart  
  Add To Saved Cart  


Weatherbond Pro TPO Bonding Adhesive, Solvent Based. Coverage: 60 sqft/G. 5-Gallon Can. Price/Can.

Ordering Notes:

  • Flammable item.
  • UPS Ground or Truck Shipment Only.
  • Cannot ship to SCAQMD or resticted VOC areas; 45 cans/pallet; special order terms apply.


WeatherBond PRO TPO Bonding Adhesive, high strength solvent-based contact adhesive that allows quick bonding of TPO membranes to various substrates. See Product Data Sheet (below) for details application methods. TPO PRO Bonding Adhesive is designed for bonding all types of TPO membrane including Weatherbond, Carlisle TPO, Versico TPO and JM TPO to various substrates. Its also known as SURE-WELD bonding adhesive.


  • About 60 square feet (56 sq m) per gallon (finished surface).
  • Porous and irregular surfaces and substrates may require more bonding adhesive than the typical coverage rate.


  • Read the Material Safety Data Sheet for complete safety information prior to use.
  • WeatherBond Bonding Adhesive is FLAMMABLE - It contains solvents that are dangerous fire and explosion hazards when exposed to heat, flame or sparks. Store and use away from all sources of heat, flame or sparks. Do not smoke while applying. Do not use in a confined or unventilated area. Vapors are heavier than air and may travel along ground to a distant ignition source and flash back. A red caution label is required when shipping.
  • Avoid breathing vapors. Keep container closed when not in use. Use with adequate ventilation. If inhaled, remove to fresh air. If not breathing, perform artificial respiration. If breathing is difficult, give oxygen. Call a physician immediately. During application, efforts must be made to prevent fumes from entering the building via air ventilation ducts. Do not place open containers or mix adhesive near fresh air intake units. When possible, shut down or seal off the closest units.
  • If swallowed, DO NOT INDUCE VOMITING. Call a physician immediately.
  • Avoid contact with eyes. Safety glasses or goggles are recommended. If splashed in eyes, immediately flush eyes with plenty of clean water for at least 15 minutes. Contact a physician immediately.
  • Avoid contact with skin. Wash hands thoroughly after handling. In case of contact with skin, thoroughly wash affected area with soap and water. Note: Solvent resistant Hycron gloves are recommended when using this product to protect hands from irritating ingredients.
  • Do not thin Bonding Adhesive. Thinning will affect performance. Excessively thick or gelled material should be discarded.



More Product Information:


Email us at or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!

similar product terms: tpo adhesive, tpo bonding adhesive, tpo roof glue, tpo membrane glue, tpo membrane adhesive, tpo roofing membrane adhesive, single ply adhesive, single ply glue, membrane roof adhesive, tpo flat roof adhesive, single ply roofing adhesive, single ply membrane adhesive, carlisle tpo adhesive, carlisle adhesive, versico tpo adhesive, versico adhesive, jm tpo adhesive

  Associated Items:  
Lucas Universal Bonding Adhesive For EPDM/TPO/PVC (5G)
Universal Bonding Adhesive 8800 by Lucas. Low VOC Water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete and all types of roofing insulation. 5-Gallon Bucket. Price/Bucket.
$214.00 $153.15
Quantity:     Add to Cart

A CSG Group Company

Shop with
Peace of Mind!