Canyon Tone Clear Concentrate, Penetrating Sealer (1G) - Canyon Tone Clear CONCENTRATE, Penetrating Concrete & Masonry Sealer. Dries Flat Non-Glossy. Yields up to 10 Gallons when mixed with water. 1-GALLON CAN. PRICE/CAN. (shipping leadtime 2-3 days; sale qty limited)
 
Canyon Tone Clear Concentrate, Penetrating Sealer (1G)
CANYON-T-CLEARCON-1G
$129.00
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: Canyon Tone Clear CONCENTRATE, Penetrating Concrete & Masonry Sealer. Dries Flat Non-Glossy. Yields up to 10 Gallons when mixed with water. 1-GALLON CAN. PRICE/CAN. (shipping leadtime 2-3 days; sale qty limited).

PRODUCT OVERVIEW: Canyon Tone Clear CONCENTRATE combines reactive silane and a silicone emulsion in a single product designed to provide transparent protection over above grade concrete, masonry, aggregate, brick and stucco surfaces. The silane penetrates deeply into the substrate, chemically locking into the concrete or masonry matrix for permanent moisture, chemical and salt protection. The silicone emulsion bonds tightly to the surface for optimum water-repellency and ability to bead.

CANYON TONE CLEAR is effective against the harmful effects of water, de-icing chemicals, chloride-ion intrusion, freeze/thaw exposure, spalling, airborne pollution and acid rain.

BASIC USES:  BASIC USES CANYON TONE CLEAR protects exterior, above-grade vertical and horizontal concrete, masonry, aggregate, brick and stucco surfaces against the effects of water, de-icing chemicals, chloride-ion intrusion, freeze/thaw exposure, spalling, airborne pollution and acid rain.

It is used on building exteriors, parking garage floors and ramps, walkways and decks, and other areas where a clear, non-yellowing protective sealer is required.

Because CANYON TONE CLEAR is water-based, it can be used safely on interior applications without toxic or solvent odors.

ADVANTAGES

  • Single Coat Application – CANYON TONE CLEAR is applied in a one-coat, surface flooding treatment.
  • Single Package – No catalyzation required. Easy application by brush, roller or spray.
  • Water-Based – No solvents or solvent odors. Easy cleanup with soap and water.
  • Meets all VOC requirements.
  • UV Stable – No discoloration or yellowing with age.
  • Retains Natural Appearance – No glaze, gloss or visible sheen on treated surfaces.
  • Protects from airborne pollution and acid rain.
  • Prevents darkening and discoloration of treated surfaces during periods of rain.
  • Protects against freeze/thaw and spalling.
  • Protects against efflorescence or migrating salts.
  • Can be applied by brush or roller, as well as by airless, conventional or pump sprayer.
  • Breathing System – Allows moisture vapor to escape from the building interior.

MIXING & APPLICATION INSTRUCTIONS

MIXING: CANYON TONE CLEAR CONCENTRATE is diluted with water at the jobsite to the desired concentration. The standard dilution for most applications is 1 part CANYON TONE CLEAR CONCENTRATE to 9 parts water. This will result in a 7% active content. One gallon (3.8 l) of CANYON TONE CLEAR CONCENTRATE will therefore yield 10 gallons (38 l) of diluted product. If a higher solids dilution is desired for increased water-repellency on porous substrates, CANYON TONE CLEAR CONCENTRATE can be diluted up to a 21% active content concentration. Blend 1 part concentrate with as little as 4 parts water to achieve the desired dilution. See Product Datasheet for detailed instructions and other options.
APPLICATION: CANYON TONE CLEAR can be applied by brush, roller, airless or conventional spray, and also by low pressure pump-style sprayers. The most effective application method is by low pressure airless spray. See Product Datasheet for detailed instructions.

MORE PRODUCT INFORMATION:
Product Data Sheet
MSDS Sheet


similar product terms: concrete sealer, concrete sealers, concrete finish, concrete driveway sealer, cement sealer, stamped concrete sealer, wet look concrete sealer, clear concrete sealer, concrete water seal, concrete block sealer, penetrating concrete sealer
 

  Associated Items:  
 
 
 
MasterKure CC 1315 WB (Kure 1315) Concrete Sealant (5G)
51678380
 
BASF MasterKure CC 1315 WB (formerly Kure 1315), WATER BASED, SEMI-GLOSS, 26% SOLIDS, CONCRETE SEALANT, DUSTPROOFING & CURING AGENT. LOW VOC. MEETS ASTM C1315 TYPE-1 CLASS-A. 5G PAIL. PRICE/PAIL. (special order; see detail view ordering notes)
 
$154.00 $116.95
Quantity:     Add to Cart
 
 
 
 
 
MasterKure CC 250SB (Kure-N-Seal 25LV), Concrete Sealant (5G)
51678592
 
BASF MasterKure CC 250SB (formerly Kure-N-Seal 25LV). A Semi-Gloss Low-Viscosity Concrete Sealant, Dustproofing & Curing Agent. 5-Gallon Pail. Price/Pail. (601 VOC, shipping restricted; flammable; ground shipment only)
 
$142.00 $101.95
Quantity:     Add to Cart
 
 
 
 
 
MasterProtect H 1000 (Hydrozo 100), 100% Silane Penetrating Sealer (5G)
HYDROZO-100
 
MasterProtect H 1000 (formerly Hydrozo 100) penetrating sealer and water repellant. Clear, 100% silane for concrete and masonry, Vertical/Horizontal, Traffic Grade. 5-Gallon Pail. Price/Pail. (leadtime of 2-3 weeks for 1 pail orders; UPS ground only)
 
$401.00 $290.95
Quantity:     Add to Cart
 
 
 
 
 
MasterProtect H 200 Concrete/Masonry Silane Sealer (Enviroseal20) (5G)
ENVIROSEAL-20
 
MasterProtect H 200 (formerly Enviroseal® 20), clear, water-based, 20% silane penetrating sealer / water repellant. For stucco, concrete, brick and masonry. 5-Gallon Pail. Price/Pail.
 
$191.00 $143.75
Quantity:     Add to Cart
 
 


Shop with
Peace of Mind!