Product:

Lucas 758 Fibered Aluminum Roof Coating. Provide a durable reflective surface for roofs, metal buildings, and mobile homes. ASTM D-2824 Type III and Miami-Dade approved. 1-Gallon/Pail. Price/Pail. (5G pail shown in photo)

Ordering Notes:

• Combustable item; UPS Ground or Truck shipping only.

Description:

Lucas 758 is ASTM D-2824 Type III and Miami-Dade approved. It provides a reflective surface for roofs, metal buildings, and mobile homes. Lucas 758 Fibered Aluminum Roof Coating is formulated from specially refined asphalt, aromatic and aliphatic solvents, reinforcing non-asbestos fibers and 2 lbs. per gallon of leafing aluminume. Formulated to spread easily and evenly by brush or spray.

APPLICATION:

• Apply Lucas 758 Aluminum Roof Coating Surface to be coated must be dry and free of dirt or corrosion particles. Mechanically mix coating thoroughly and continuously before and during application.
• Power mixing is recommended, a “jiffy mixer” and 1/2 inch drill is recommended for 5 gal pails. Apply evenly with a soft bristle brush or suitable spray equipment at the rate of not less than one half and not more than three quarters of a gallon per 100 square feet.
• For best results, brush coating in one direction with the slope of the roof. Do not apply over fresh roof repairs or coating.
• Roofing asphalts, both hot and cold applied, contain oily constituents which may bleed through and stain the finished coating. As this condition is unpredictable, manufacturer recommendeds that the user apply a small amount of #608 to the area of the roof to be coated in order to test its performance.
• Use #608 as it comes from the container, no thinning is necessary with this product. Clean up with Lucas #125 Safe Solve.

ADDITIONAL INFORMATION:

• Container Sizes: 1, 5 Gallon

More Product Information:

• Product Data Sheet
• MSDS Sheet