Product: Miro Model 24-Base Strut-18 Rooftop Gang Conduit Support System. 24" Wide Strut Support, Adjusts in Height from 4-1/2 to 18", 19 x 23" Polycarbonate Base. Price/Each.
Product Description: A pipestand with a strut and clamp pipe support system used for ganging roof mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 24" length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut. The pipe support base is made of MIRON TPC™ or resin; and the strut is made of hot-dip galvanized steel.
Product Data Sheet
|Key Information: 24-Base Strut-18
||The base is 19" x 23", and support a maximum bar length of 24".
|Max Pipe Clearance:
||The 24-Base Strut-18 can be adjusted in height from a low of 4-1/2" to a high of 18" in elevation from the bottom of pipe support.
|Max Load Weight:
||Maximum load weight may not exceed 640 lbs. per base.
||Manufacturer's recommended spacing is not to exceed 10 foot centers depending upon the load.