Product:

Hand Hammer Drive Pins, 3/4 inch long, 1/4 inch head, 0.140 inch shank diameter. For Concrete and Block. Made by Powers. Price/100.

Ordering Notes:

• Shipping lead time: 1-2 business days.

Description:

Hammer Drive pins are designed for permanently fastening a fixture to concrete and some types of concrete block. Designed for use in a standard hand tool and should not be used in a powder actuated tool. Pins are formed with 1/4 inch diameter head on one end, a 0.140 inch diameter shank in various lengths, and a specially designed point to allow proper penetration into the base material. 3/8 inch diameter steel washer is mounted over the point to retain the drive pin in the fastener guide of the tool and to provide guidance during the driving operation. Recommended for light duty static load applications where holding power is not a critical factor. Should not be used overhead.

OPTIONS:

Available in 3/4, 1, 1-1/4, 2, 2-1/2, and 3 inch lengths.

MORE INFORMATION

• Pins General Selection Guidelines
• Pins Performance Data