PRODUCT: Hand Hammer Drive Pins, 1" long, 1/4" head, 0.140" shank diameter. For Concrete and Block. Made by Powers. Price/100.
DESCRIPTION: Hammer Drive pins are designed for permanently fastening a fixture to concrete and some types of concrete block.
-
Designed for use in a standard hand tool and should not be used in a powder actuated tool.
-
Pins are formed with 1/4" diameter head on one end, a 0.140" diameter shank in various lengths, and a specially designed point to allow proper penetration into the base material.
-
3/8" diameter steel washer is mounted over the point to retain the drive pin in the fastener guide of the tool and to provide guidance during the driving operation.
-
Recommended for light duty static load applications where holding power is not a critical factor.
-
Should not be used overhead.
OPTIONS: Available in 3/4, 1, 1-1/4, 2, 2-1/2, and 3 inch lengths.
Questions?
Email us at sales@bestmaterials.com
or call 1-800-474-7570 / 602-272-8128
You'll get a prompt reply!
similar product terms: drive pin, hammer drive pin, concrete pin, concrete drive pin, concrete anchor, hand drive pin hand drive anchor |