PRODUCT: Miro Model 4-RAH-7 Rooftop 4-inch Pipe Adjustable Roller Pipe Support. Adjusts from 4.5 - 7 inch Height. 9x15.25 inch Polycarbonate Base. 1-Unit. Price/Each. (7/case; order full cases for added discounts) Replaced with item# MIRO-4-RAH-10-1.
APPLICATIONS: "Roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other heavy mechanical piping.
Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller.
The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel.
Pipestand will accommodate up to 4" pipe (nominal size) or up to 4.5" outside diameter pipes.
Materials: Base is polycarbonate. All metal parts are made from stainless steel.
Size: The deck base is 9" by 15.25" and has a maximum cradle width of 4".
Max. Pipe Size: 4" inside diameter and 4.5" outside diameter.
Max. Pipe Clearance: The 4-RAH-7 can adjust in height from 4.5" to 7" in elevation above the roof membrane.
Max. Load Weight: Maximum load weight may not exceed 223 lbs. per pipestand.
Spacing: Recommended spacing is not to exceed 10 feet centers depending upon the load. Make certain each pipestand is properly elevated to even the load weight on all pipestands. Do not exceed 150 lbs. per pipestand.
Other standard sizes available to fit up to 6 inch pipes with heights up to 12 inches. Custom configurations also available. Pipe Straps also available.
Email us at firstname.lastname@example.org or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
similar product terms: Miro, pipe support, gas support, mechanical support, 4-RAH-7, pipe stand, 4-RAH pipe support, pipe supports, 4-RAH pipe support, miro pipe supports, miro pipe support, pipe stand, pipe stands, pipe supports, rooftop pipe support, polycarbonate pipe support