Black EPDM Flashing Grade Tape, 6 in. X 100 ft. Roll (1) - Black EPDM FLASHING Grade Tape With Butyl Rubber Peel and Stick Adhesive. Uncured Flashing Grade EPDM stretches more for sealing irregular areas. LionGUARD Brand, Made in USA. 6-Inch Wide X 100 Foot Roll. Price/Roll.
 
Black EPDM Flashing Grade Tape, 6 in. X 100 ft. Roll (1)
EPDM-6060-100
$197.00 SALE $151.95
(Savings: $45.05)
 
 Buy 3 or more and pay $144.95 each (save $52.05) 
 Buy 4 or more and pay $142.95 each (save $54.05) 
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: Black EPDM FLASHING Grade Tape With Butyl Rubber Peel and Stick Adhesive. LionGUARD Brand, Made in USA. 6-Inch Wide X 100 Foot Roll. Price/Roll.

DESCRIPTION:
Uncured Flashing Grade EPDM stretches more for sealing irregular areas. EPDM Flashing Tape is used where pipes, stacks, vents or corners require a flexible flashing product to ensure no water infiltration into the roofing system. The LionGUARD Flashing Tape allows molding and slight stretching of the material to shape. It will then slowly cure permanently into the form it was fashioned. Use for field flashing corners, stacks, vents etc. LionGUARD brand Flashing Tape has a UNCURED EPDM cover face and a specially formulated peel/stick butyl rubber mastic adhesive. This peel and stick product has exceptional adhesion, long-term heat and chemical resistance and gives tape the ability to remain flexible in harsh conditions. Surpassing the industry standards for tack and shear strength products provide superior holding power for long life and high durability.

INSTALLATION: SEE DATA SHEET FOR DETAILED INSTRUCTIONS.
Always clean membrane with Splice Wash and Apply LionGUARD Tape primer prior to installation of tapes. Do not over over-stretch.

EPDM Flashing Grade product is a peel and stick uncured flashing tape. It can be used with EPDM, TPO and most PVC roofing membranes. Each requires special primers to first be used.

Installation Summary: Clean membrane. Prime membrane using EPDM primer. Allow primer to dry before installing tapes. Apply tape to primed area by peeling release paper off of 6 - 12 inches of tape. Stick the tape onto the membrane, while continuing to pull release paper off. Make sure you start on a straight line. Continue pulling release paper off as you move down the pre - primed area. Use sharp scissors for cutting the cover tape. Use a seam roller with some force, perpendicular to tape, to fuse sealant to surface. OPTIONAL: Apply M1 sealant to exposed edge of EPDM Flashing after installation.

SPECIFICATIONS:
  • Base Membrane - Black EPDM, 0.030 -0.040"
  • Adhesive: Black Butyl Adhesive, 0.030".
  • Packaging: Rolled with silicone release paper.
OPTIONS:
  • Available in either black or white EPDM.
  • Black Roll Sizes - Roll Sizes - 6" x 25', 6" x 50', 6" x 100', 9" x 50', 9" x 100', 12" x 50'. White Roll Sizes: 6" x 100'

TECHNICAL DATA SHEET AND INSTALLATION

MSDS SHEET

Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!

similar terms: flashing tape, epdm flashing, uncured flashing, uncured epdm flashing, epdm flashing tape, roof flashing tape, epdm repair, epdm tape, epdm repair tape, epdm seam tape, rv roof tape, rv roofing tape, rubber roof repair, rubber roof tape, rubber roofing tape, black cover tape, black coverstrip, sealcorp tape, sealcorp, lionguard
 

  Associated Items:  
 
 
 
Seam Tape Primer STP700, 1-Pint
EPDM-ST-P700-P
 
Seam Tape PRIMER, STP700. High quality solvent based Primer for EPDM and TPO Seams, Coverstrip or Adhesives. Primer is scrubbed into clean membrane before applying tapes. 1-Pint Can. Price/Can. (see ordering notes in detail view)
 
$20.00 $16.25
Quantity:     Add to Cart
 
 


Shop with
Peace of Mind!