Product:

NovaTuff PC-425 Underwater Grade 2-Part Polyamide-Epoxy Protective Fountain Coating. For Continuous Submersion/Corrosion Resistance. Use on concrete, masonry, metal, other surfaces. 75% Elongation, 82% Solids. 4G Kit. (1.33G A, 2.67G B). Price/Kit.

Ordering Notes:

• Specify COLOR before Adding to Cart.
• Nickel-Gray, Tan and White and Standard Colors. Others are Custom Colors, and cannot be cancelled or returned once purchased.
• Ground or truck shipment only. Shipping Leadtime 2-4 business days on Custom Colors. 1-2 days on White, Tan and Nickel.

Description:

NovaTuff PC-425 Protective Fountain Coating is a tough and flexible waterproof coating for concrete, metal, wood, and other surfaces. This Protective Fountain Coating is a high-solids polyamide-epoxy resin used in applications where chemical and corrosive resistance is required and where moisture may prevent the use of other coatings. It can be used under constant immersion in water and for applications where movement may prevent the use of other epoxy coatings.

FEATURES:

• NovaTuff PC-425 with 82% Solids, provides more flexibility than PC-450 (100% solids).
• NovaTuff PC-425 is excellent as a waterproofing and protective coating for masonry, fountains, pools, or walls and also for steel tanks, cooling towers, vats, in various applications.
• NovaTuff PC-425 can be used under constant immersion in water and for applications where movement may prevent the use of other epoxy coatings, and is suitable for interior and exterior applications.
• Highly resistant to acids, solvents, caustics, hydrocarbons, freshwater, etc.
• Excellent outdoor durability.
• Adheres well and is self priming to metals of all types, concrete, plaster, masonry, and most surfaces.
• Provides a secure barrier to water penetration.
• Stays flexible through years of harsh service.
• Retains flexibility in sub-zero conditions.
• Withstands constant immersion and ponding water.
• 100% adhesion of product to cleaned substrate.
• Above or below grade.

COVERAGE:

• READ PRODUCT DATA SHEET AND MSDS SHEETS BEFORE OPENING AND USE.
• NovaTuff PC-425 can be applied by brush or roller at approximately 100-200 sq. ft. per gallon.
• A two-coat application is recommended to help insure complete waterproofing protection.
• Dry Film Application Rate:

To yield dry film of 6.5 mils, apply 200 Sq. Ft/gallon

To yield dry film of 13 mils, apply 100 Sq. Ft/gallon (recommended)

TYPICAL PROPERTIES:

• Tensile: 1700 PSI; 75% Elongation, Impact Resistance 52 in-lbs; Mandrel Bend 1/2 inch, UV Resistant = Yes. See Product Data Sheet for more information.

CURING TIMES:

• Pot Life: 1.5 hours at 80°F
• Drying Time: 4 hours at 80°F
• Complete Cure: 7 days at 80°F

COLOR OPTIONS:

• Available standard in Nickel-Gray, Tan and White. Also available Premium Colors, cost adders apply).

PACKAGING OPTIONS:

• 3/4-gallon Kit: 1 gallon can containing 1/2 gallon of Base (Part "B"), 1 gallon can containing 1/4 gallon of Activator (Part "A")
• 4-gallon Kit: 1 can with 2-2/3 Gallons Base (Part-B), 1 tray with 1-1/3 gallon of Activator (Part "A")

CAUTIONS:

• Personal protection required. Read MSDS sheet prior to opening and using.

More Product Information:

• MSDS SHEET
• Product Data Sheet
• Product Mixing Guidelines (EXAMPLE)