Product:

Royal Millennium PG-1 Fleece-Back Membrane & Insulation Adhesive. VOC Free, All Purpose, Low Rise Polyurethane Foam Adhesive. Sets in Minutes. 2-Component 1.5 Liter Cartridge Sets (2 x 750 cartridges). 4 Sets/Case. Price/Case.

Ordering Notes:

• shipping leadtime: 3 weeks.

Description:

Millennium PG-1 Fleeceback Membrane Adhesive Low Viscosity Insulation Adhesive is designed for use as an adhesive for bonding approved fl eece backed single ply membranes (TPO, PVC, EPDM) to a building’s structural roof deck, base sheets, insulation boards, and smooth surfaced built-up and modifi ed bitumen roof surfaces. It is dispensed in 1/2 inch to 3/4 inch (1.3cm - 1.9cm) wide liquid beads that will quickly spread to a width of 2-3 inches. The adhesive will expand and rise to fi ll minor surface irregularities.

Benefits:

• Universal Formula: Approved for both insulation and membrane attachment
• Replaces Fasteners: Minimizes penetrations deck corrosion, and thermal bridging
• Low Rise Foam: Accommodates minor surface irregulatities
• Solvent Free: Essentially VOC free, approved for use in VOC regulated markets

Surface Preparation:

All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven. For re-cover applications over gravel surfaces apply Millennium Universal Primer prior to the application of PG-1 Insulation Adhesive. For applications over fresh and/or nonoxidized asphalt, coal tar or plastic film membranes, Millennium Surface Treatment may be required prior to the application of PG-1 Insulation Adhesive.

APPROVED APPLICATIONS:

• HD Wood Fiber
• Polyisocyanurate
• Polystyrene (XPS & EPS)
• Gypsum cover board
• Asphaltic cover boards
• Concrete
• Gypsum roof deck
• Cementitious wood fiber
• Wood or Steal
• Lightweight insulating concrete
• Modified bitumen membranes and base sheets
• Approved insulations (multi-layer applications)
• Smooth or gravel surface built-up roof
• Re-roof applications

SAFETY:

Prior to working with this or any adhesive product consult product label and Safety Data Sheet (SDS) for necessary health and safety precautions.

LIMITATIONS:

• Do not apply to wet surface
• Not recommended for use with insulation boards larger than 4 ft. x 4 ft. (1.2m x 1.2m)
• Do not use warped or curled insulation boards. All insulation boards must lay fl at upon the roof surface
• Do not apply when temperatures are below 40°F (5°C)

MORE INFORMATION:

• Product DataSheet
• Installation Video

similar product terms: Royal Millennium PG-1, Mellennium membrane adhesive, Millennium PG-1 Fleece-Back, PG-FA15-04, insulation adhesive, roofing adhesive, roof insulation, panel adhesive, no voc adhesive, voc approved adhesive, tpo ahesive, pvc adhesive, epdm adhesive, adhesive foam