18 inch Skylight Tile Roof Flashing Skirt - 18 inch Tile Roof Flashing Skirt. Fits Natural Light 18K series Solar Lights , 32 in. x 35 inch skirt. Soft Heavy-Gauge Aluminum with a Rubber Seal. Fits over the base unit. Price/Each. (aka #18S; UPS shipping only)
 
18 inch Skylight Tile Roof Flashing Skirt
SOLAR-SKYLIGHT-18S
$157.00 SALE $110.95
(Savings: $46.05)
 
 Buy 20 or more and pay $103.95 each (save $53.05) 
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 

PRODUCT:  18 inch Tile Roof Flashing Skirt. Fits Natural Light 18K series Natural Solar Lights, 32 in. x 35 inch skirt. Soft Heavy-Gauge Aluminum with a Rubber Seal. Fits over the base unit. Price/Each. (aka #18S; UPS shipping only)

DESCRIPTION:

* OVERVIEW: The Natural Light Energy Systems #18S, Tile Roof Flashing Skirt, fits over the 18" Natural Light # 18K series Solar Light.

* SHIPPING: UPS ONLY.

INSTALLATION:

1. On the roof, locate a hole location and carefully remove surrounding tiles. Remove enough tiles to accommodate the skirt. Place flashing over the location where the unit will be installed and mark the flashing footprint onto the furring strips. Remove the portion of the furring strips where the inside of the flashing will be installed (allowing the flashing to sit directly on roof sheathing).

2. Outline the diameter of the hole that the base unit will pass through. NOTE: DO NOT CUT THROUGH ANY FRAMING MEMBER.

3. Caulk underside of fan base with the provided caulking material. Two concentric rings of caulking material is sufficient. Secure fan base with the Phillips head screws provided. Apply addition felt or roofing underlayment and furring strips as needed.

4. Install the flashing skirt over the fan base and press down the rubber ring all around the installed fan base.

5. On the high side of the roof towards the ridge, replace the tiles OVER the skirt. Cut tiles to fit around flashing . Adhere cut tiles using NP1 sealant. Some furring strips may need to be replaced on top of flashing footprint to support tiles. Replace the tiles on the low side of the roof. Slide under tile skirt and then reshape the skirt to form around the tiles. Again, adhere any cut tiles using NP1 sealant.

INSTALLATION PHOTOS: Follow the procedure for the solar light installation:

Detail Installation Instructions

 

terms: tile roof flashing, Solar Fan, solar fan, attic fan, solar powered fan, solar powered attic fan, solar powered roof fan, solar roof ventilator, solar powered roof fan, solar roof fan, solar attic fans, attic ventilation, Solar Fan, solar power

 

  Associated Items:  
 
 
 
18 Inch Tubular Skylight, Flat or Pitched Roof
SOLAR-SKYLIGHT-18K
 
18 Inch Tubular Skylight Model for Flat or Pitched Roofs, Clear Top Lens. Illuminates up to 500 quare foot area (equivalent to about 1000 watts). Price/Kit. (Shipping UPS only)
 
$447.00 $397.95
 
 
 
 
 
EternaBond AlumiBond AS-2-50 Waterproofing / Roof Tape, 2 inch x 50 ft. Roll
A-SEAL2X50
 
EternaBond AlumiBond AS-2-50, 2 inch wide x 50 foot roll. Heavy aluminum faced peel/stick flashing, roof repair and waterproofing tape. 15 year Eternabond Warranty. Made in USA. Price/Roll.
 
$44.00 $30.95
Quantity:     Add to Cart
 
 
 
 
 
Lucas #9600 High Performance Joint Sealant, GREY Color, 10 oz. (1)
LUCAS-9600-G-1
 
Lucas #9600 High Performance Roofing, Joint and Termination Sealant, GREY Color. 100% Solids, 400% Elongation, 400 PSI Tensile, Fast Curing Hybrid Polyurethane. For Roof, Walls, Door, Windows, Siding. 10 oz Tube. Price/Tube.
 
$6.00 $2.95
Quantity:     Add to Cart
 
 

A CSG Group Company


Shop with
Peace of Mind!