Product:

NovaTuff FC-200 (formerly AES-200) Protective Epoxy Floor Coating for Concrete, High Abrasion, Jet Fuel / Chemical Resistant. 2-part Epoxy Protective Coating. Nickel Gray Color. 1-Gallon Kit. Price/Kit.

Ordering Notes:

• Flammable; Ground or truck shipment only.
• Shipping leadtime: 2-4 business days.

Description:

NovaTuff FC-200 Epoxy Floor Coating is a high-solids polyamide-epoxy resin. The formulation includes a long pot life as well as flexible properties, which allows it to withstand extreme abrasive conditions. NovaTuff FC-200 is a decorative and protective epoxy coating especially developed to protect and seal concrete floors. It is best suited for horizontal surfaces.

FEATURES:

• FC-200 is a high-solids polyamide-epoxy resin. The provides a long pot life, flexible properties, outstanding chemical resistance, extreme abrasion resistance.
• FC-200 is a both a decorative and protective epoxy coating especially developed for masonry surfaces. In addition, it may be applied to terrazzo, cinder block, brick, stone, glass, wood, metal, or asphalt. AES-200 is best suited for, but not limited to horizontal surfaces.
• Provides a secure barrier to chemical penetration. Suitable for food preparation areas. Highly resistant to various solvents, gasoline, oils, hydrocarbons, acids, alkalis and particularly food acids. Excellent for chemical containment facilities.
• Jet Fuel Resistant: Excellent for airplane hangars and service facilities.
• Excellent abrasion resistance.
• Adheres to moist concrete, such as basement floors.
• Excellent adhesion of product to substrate. Self-priming in most situations.

APPLICATIONS:

FC-200 is a protective coating for industrial floors, stairs, tanks, decks, equipment, and much more. AES-200 can be used where moist areas may prevent the use of other coatings. FC-200 is used in commercial, industrial, and residential surroundings.

APPLICATION METHOD:

3/8 nap phenolic core roller, or spray.

COVERAGE /APPLICATION RATE:

• Read PRODUCT DATA SHEET and the MSDS SHEET before opening and use. FC-200 can be applied by brush or roller.

A two-coat application is generally recommended to help insure complete protection.

A two-coat application is recommended to help insure complete protection. Surfaces subject to significant movement or other difficult conditions may require heavier applications and the use of reinforcement fabrics. All penetrations or transitions of surface materials should be use reinforcement fabrics.

Dry Film Application Rate:

• To yield dry film of 9 mils, apply 150 Sq. Ft/gallon
• To yield dry film of 13 mils, apply 100 Sq. Ft/gallon

TYPICAL PROPERTIES:

• Please view the Product Data Sheet.

CURING TIMES:

• Pot Life - 4 hours @ 80°F
• Drying Time - 6 hours @ 80°F, complete cure 36 hours

color OPTIONS:

• Available standard in Nickel Gray. Also available in White and Tan. Custom tints from factory are available upon request (20-gallon minimum + cost adder).

PACKAGING OPTIONS:

• 1-Gallon Kit (.75 Gallon Base and 0.25 Gallon Activator)
• 5-Gallon Kit (One 5 Gallon Pail with Activator Insert Tray)
• 20-Gallon kit (Four 5 Gallon Pails with Activator Insert Tray)

cautions:

• Personal protection required. Read the MSDS Sheet prior to opening and using.

video:

More product information:

• PRODUCT DATA SHEET
• MSDS SHEET
• Product Mixing Guidelines (EXAMPLE)