Miro Model 3-RAH-7 Roller Rooftop Pipe Support. Adjustable Pipe Clearance from 2.75 to 7-inches. Fits up to 3 inch Pipes. 7x10 Polycarbonate Base. Made in USA. 1-Unit. Price/Each. (THIS UNIT IS BEING REPLACED WITH MIRO-3-RAH-8-1. We have limited stock on this old style.)
pipe support used to support roof-mounted gas pipes, electrical conduit,
solar piping and other mechanical piping.
Unique design absorbs thermal expansion and contraction of pipes
thus preventing damage to the roof membrane. Pipes rest on a
self-lubricating polycarbonate resin roller rod and roller.
The pipe support base is made of polycarbonate resin, the supporting
all-thread and all metal parts are made of stainless steel.
Pipestand will accommodate up to 3" pipe (inside diameter) or up to 3
3/4" (outside diameter) pipes.
Materials: Base is polycarbonate. All metal parts are made from stainless steel.
Size: The deck base is 9" by 15.25" and
has a maximum cradle width of 4".
Max. Pipe Size:
3" inside diameter and 3.75" outside diameter.
Max. Pipe Clearance: The 3-RAH can adjust
in height from a low of 2.75" to a high of 7" in elevation above the roof
Max. Load Weight: Maximum load
weight may not exceed 115 lbs. per pipestand.
Spacing: Recommended spacing is not to exceed 10 feet centers
depending upon the load. Make certain each pipestand is properly elevated to
even the load weight on all pipestands. Do not exceed 100 lbs. per pipestand.
Other standard sizes available to fit 3 to 6 inch pipes with heights up to
12 inches. Custom configurations also available.
Email us at
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!
similar product terms: pipe stand,
pipe stands, Miro pipe stand, Miro, pipe support, pipe supports, pipe
support systems, grinnell pipe supports, frp pipe supports, fiberglass
pipe supports, pipe support bridge, pipe support system, pipe supports for
roof, pipe supports for roof installation