White EPDM Flashing Grade Tape, P/S, 12 in. X 50 ft. Roll - White EPDM FLASHING Grade Tape With Butyl Rubber Peel and Stick Adhesive. Uncured Flashing Grade EPDM stretches some for irregular areas. WeatherBond Brand, Made in USA. 12-inch Wide X 50 Foot Roll. Price/Roll.
 
White EPDM Flashing Grade Tape, P/S, 12 in. X 50 ft. Roll
EPDM-309951
$423.00 SALE $302.95
(Savings: $120.05)
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: White EPDM FLASHING Grade Tape With Butyl Rubber Peel and Stick Adhesive. Uncured Flashing Grade EPDM stretches some for irregular areas. WeatherBond Brand, Made in USA. 12-inch Wide X 50 Foot Roll. Price/Roll.

DESCRIPTION:
Stretchable Flashing Grade Uncured EPDM is used for general repairs and irregular areas. EPDM Flashing Tape is commonly used where pipes, stacks, vents or corners require a flexible flashing product which can form and seal to ensure no water infiltration into the roofing system. Also for Deck Ledger Flashing. The Flashing Tape allows molding or slight stretching of the material that slowly cures into the form it was fashioned. Use for field flashing corners, stacks, vents etc. Flashing Tape has a UNCURED EPDM cover face and a specially formulated peel/stick butyl rubber mastic adhesive. This peel and stick product has exceptional adhesion, long-term heat and chemical resistance and gives tape the ability to remain flexible in harsh conditions. Surpassing the industry standards for tack and shear strength products provide superior holding power for long life and high durability.

INSTALLATION: SEE DATA SHEET FOR DETAILED INSTRUCTIONS.
Always clean membrane with Splice Wash and Tape primer prior to installation of tapes. Do not over over-stretch.

EPDM Flashing Grade product is a peel and stick uncured flashing tape. It can be used with EPDM, TPO and most PVC roofing membranes. Each requires special primers to first be used.

Installation Summary: Clean membrane. Prime membrane using EPDM primer. Allow primer to dry before installing tapes. Apply tape to primed area by peeling release paper off of 6 - 12 inches of tape. Stick the tape onto the membrane, while continuing to pull release paper off. Make sure you start on a straight line. Continue pulling release paper off as you move down the pre - primed area. Use sharp scissors for cutting the cover tape. Use a seam roller with some force, perpendicular to tape, to fuse sealant to surface. OPTIONAL: Apply M1 sealant to exposed edge of EPDM Flashing after installation.

SPECIFICATIONS:
  • Base Membrane - White EPDM, 0.030 -0.040"
  • Adhesive: Cream-White Butyl Adhesive, 0.030".
  • Packaging: Rolled with silicone coated release paper.
OPTIONS:
  • Available in either black or white EPDM.
  • Black Roll Sizes - Roll Sizes - 6" x 25', 6" x 50', 6" x 100', 9" x 50', 9" x 100', 12" x 50'. White Roll Sizes: 6" x 100', 9" x 50', 12" x 50'.

TECHNICAL DATA SHEET AND INSTALLATION

MSDS SHEET

Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!

similar terms: white flashing tape, white epdm flashing, white uncured flashing, uncured epdm flashing, self adhesive membrane, deck flashing, deck ledger flashing, ledger flashing, epdm flashing tape, roof flashing tape, epdm repair, epdm tape, epdm repair tape, epdm seam tape, rv roof tape, rv roofing tape, rubber roof repair, rubber roof tape, rubber roofing tape
 

  Associated Items:  
 
 
 
Seam Tape Primer LG-TP70 (1-Gallon)
EPDM-LG-TP70-1G
 
Seam Tape Primer, LionGUARD LG-TP70. For use with EPDM or TPO Seam Tapes, (use tolulene Seam Cleaner first). Made in USA. 1-Gallon Can. Price/Can. (flammable item; UPS Ground or Truck Shipment Only; Cannot ship to VOC restricted areas)
 
$45.00 $33.95
Quantity:     Add to Cart
 
 

A CSG Group Company


Shop with
Peace of Mind!