#1001IE-MV Concrete Crack Injection Epoxy, MEDIUM Viscosity, 16.5 oz - CPR # 1001-MV Injection Epoxy, MEDIUM Viscosity. Deep penetrating concrete crack repair / welding material. Dual-cartridge Unit (300 mL x 150 mL, ~16.5 oz. net) with Mixing Nozzle and Nut. Price/Unit. (UPS Ground only; 1-4 day leadtime; not returnable)
 
#1001IE-MV Concrete Crack Injection Epoxy, MEDIUM Viscosity, 16.5 oz
CPR-1001IE-MEDIUM-1
$35.00 SALE $26.95
(Savings: $8.05)
 
 Buy 5 or more and pay $24.85 each (save 29.00%) 
 Buy 15 or more and pay $24.15 each (save 31.00%) 
 
  Order Options:  
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 

PRODUCT: CPR # 1001-MV Injection Epoxy, MEDIUM Viscosity. Deep penetrating concrete crack repair / welding material. Dual-cartridge Unit (300 mL x 150 mL, ~16.5 oz. net) with Mixing Nozzle and Nut (not shown in photo). Price/Unit. (UPS Ground only; 1-4 day leadtime; not returnable)


DESCRIPTION: #1001 Injection Epoxy is a 100% solids moisture-insensitive 2-part epoxy designed to permanently restore structural strength to cracked concrete. It can be used for filling horizontal cracks or injecting vertical cracks through ports (not supplied). 1001 has a gel time of only 30 minutes. The unique wetting properties allow for maximum penetration into cracks 0.005” or larger. Injection Epoxy is available in four viscosities for use different width cracks. It uses a 1/4" Mixing Nozzle and nut which are included.

This is add-on tube set is used to suppliment kits or to make small repairs. A typical 8' x 1/32 crack requires 2-3 tubes.

It can be used for filling horizontal cracks or injecting vertical cracks through ports (not supplied). The medium viscosity is for medium cracks. Also, if there is a void or access to the exterior behind a crack, the faster reaction time prevents loss of much material.

Requires: 1/4" x 24 Element Static Mixer Nozzle & Nut which are included.

MORE INFORMATION:
Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!


similar product terms: fast cure epoxy injection, fast cure concrete crack repair, basement wall epoxy crack inkection, basement concrete crack repair kit, concrete crack injection kit, basement wall crack repair, epoxy crack injection, concrete wall crack repair, concrete crack repair, wall crack fillers, concrete crack injection, concrete crack fill, concrete crack seal, concrete crack sealer, epoxy crack injection, crack injection, epoxy crack filler, epoxy injection, foundation crack repair


 

  Associated Items:  
 
 
 
#1001IE Concrete Crack Injection Epoxy, HEAVY Viscosity, 16.5 oz
CPR-1001IE-HV-1
 
CPR # 1001IE-Heavy Injection Epoxy, HEAVY Viscosity. Concrete crack repair / welding material for larger cracks. Dual-cartridge Unit (300 mL x 150 mL, ~16.5 oz. net) with Mixing Nozzle and Nut. Price/Unit. (UPS Ground only; 1-4 day leadtime; not returnabl
 
$36.00 $27.95
Quantity:     Add to Cart
 
 
 
 
 
#1001IE Concrete Crack Injection Epoxy, Quick Curing (16.5 oz)
CPR-1001EIE-1
 
CPR # 1001EIE Express Injection Epoxy. Quick-curing concrete crack repair / welding material (good in low temps), LOW Viscosity. Dual-cartridge Unit (300 mL x 150 mL, ~16.5 oz. net) with Mixing Nozzle and Nut. Price/Unit. (UPS Ground only, 1-3 day leadtim
 
$42.00 $31.95
Quantity:     Add to Cart
 
 
 
 
 
#1001IE Concrete Crack Injection Epoxy, SPECIFY GRADE (case/15)
CPR-1001IE-15
 
CPR # 1001IE Injection Epoxy. Fast-curing strong concrete crack repair / welding material. Dual-cartridge Units (300 mL x 150 mL, 16.5 oz. net). 15 Dual-Cartridges/Case with Mixers. Price/Case. (SPECIFY GRADE before adding to cart; Non Returnable)
 
$402.00 $309.95
 
 
 
 
 
Newborn 535-XSP 2-Part Caulk Gun, Convertable, 75/150/300
NB-535-XSP
 
Newborn 535-XSP Dual-Component Convertable Caulk Gun. E-Z Thrust 26:1 Thrust Ratio. Easily converts between 75x150, 150x150, 150x300 and 300x300 ml cartridges. Price/Each.
 
$127.00 $97.55
Quantity:     Add to Cart
 
 
 
 
 
No. 9 Euro Nut, for Epoxy Mixing Nozzles
EM-001-0001480
 
No. 9 Euro Nut. Plastic retaining nut for Epoxy and Foam Static Mixers. 9-pitch plastic nut. Could be white or black color. Used for attaching the mixing nozzle to the dual component cartridge. Price/Each.
 
$3.00 $1.95
Quantity:     Add to Cart
 
 
 
 
 
Static Mixer Nozzle, 1/4 in. Dia. x 24 Element
EM-001-0001320
 
Static Mixer Nozzle, 1/4 inch diameter x 24 Element. Sized for dispensing of Emecole 102, 104, 105 and 120 2-Part Foam Products, CME Polyuretane Injection Foam, AT Injection Foams and others. Price/Each.
 
$4.00 $2.55
Quantity:     Add to Cart
 
 

A CSG Group Company


Shop with
Peace of Mind!