Elastuff 120 Polyurethane Coating, NSF 61, Part A+B, SPECIFY GRADE (5G) - Elastuff 120 Two-Component, 100% Solids Polyurethane Elastomeric Coating System. Potable Water NSF 61 Grade. Gray Color. 1G of A plus 1G of B Kit. Price/Kit. (Specify grade before adding to cart; leadtime 2-4 days; UPS Ground only)
 
Elastuff 120 Polyurethane Coating, NSF 61, Part A+B, SPECIFY GRADE (5G)
ELASTUFF-120-2
$431.00
 
  Order Options:  
 
 
 
 
  Qty:  
 
  Add To Cart  
 
  Add To Saved Cart  
 
 
 
 
PRODUCT: Elastuff 120 PART A of Two-Components, 100% Solids Polyurethane Elastomeric Coating System. Potable Water NSF 61 Grade. Gray Color. 5 Gallon Pail. Price/Pail (Specify grade before adding to cart; leadtime 2-4 days; UPS Ground only)

APPLICATIONS: Elastuff 120 is a 100% solids 2-part polyurethane elastomer coating for waterproofing and protecting all types of surfaces. It provides a durable, abrasion and chemical resistant waterproof membrane.
 
It is suitable on a wide variety of surfaces and service conditions, including drinking water water, salt water, various slurry systems, mining, and numerous acid and base solutions. It is equally effective under dry, submerged, abrasive and/or corrosive environments.

ELASTUFF 120 is used over a wide variety of vertical and horizontal primed concrete, general below grade waterproofing, steel, iron, wood, fiber- glass and polyurethane foam surfaces. It is available in Mastic, Spray Grade or Roller Grade versions.

ELASTUFF 120 Spray Grade is applied using 1:1 ratio plural component airless spray equipment.

ELASTUFF 120 Roller Grade can be applied using a roller, squeegee, trowel, mitt or brush, it is recommended for application over horizontal surfaces only.

COVERAGE: ELASTUFF 120 applied at the coverage rate of about one gallon per 100 sq. ft. of the combined Part A and Part B will theoretically yield 16.0 dry mils.

TYPICAL PROPERTIES:
  • Mixing Ratio: 1 Part A to 1 Part B (1A:1B)
  • Mixed Usable Pot Life: 30 to 40 minutes @ 75°F, 50% R.H.
  • Dry Time to Walk On: 6 hours @ 75°F, 50% R.H.
  • Dry Time to Walk On: 6-8 hours @ 70°F
  • Cure Time: 80% after 24 hours @ 75°F, 50% R.H. [ASTM D1640]
  • Water Absorption: Less than 1% weight gain after 7 days [ASTM D570]
  • Tensile Strength: 1,750 psi ±5.72% [ASTM D412]
  • Elongation: 150% (±20) [ASTM D412]
  • Tear Strength: 200 lbs/in ±15% [ASTM D1004]
  • Hardness: 85-90 Shore A @ 75°F [ASTM D2240]
  • Low Temperature Flexibility: Passes 1/4 inch mandrel bend @ -4°F [ASTM D522]
  • Low Temperature Impact Resistance: Passes 160 inch pounds direct @ -4°F
OPTIONS: Also available in 10G Kits, 110G Kits (55G drums)

SPECIFICATIONS:
Part A MSDS (.pdf)

Questions?
Email us at sales@bestmaterials.com or
Call us at 1-800-474-7570 or 602-272-8128
You'll get a prompt reply!

similar product terms: elastuff 120, elastuff, nsf 61, nsf61, potable, potable water, polyurethane waterproofing, spray polyurethane, polyurethane foam, metal suface coat, moisture-catalyzed waterproofing coating, abrasion resistant waterproofing coating, chemical resistant coating, weatherproofing coating, mildew resistant coating, impact resistant coating
 



Shop with
Peace of Mind!