0
Items
In Cart |
TOTAL:
$0.00
|
Browse by Category
|
|
|
|
|
7/8 in. Backer Rod, Soft (Per Foot)
|
BACKER-ROD-78 |
$0.35 SALE $0.20 |
(Savings: $0.15) |
|
|
|
Buy
200
or more and pay $0.17 each (save $0.18)
|
Buy
400
or more and pay $0.15 each (save $0.20)
|
|
|
|
|
|
|
|
|
|
PRODUCT: 7/8" DIAMETER POLY
BACKER ROD, SOFT, NON-STICK CLOSED-CELLED
SKIN.
PRICE / FOOT. (custom-cut items are non-returnable or cancellable)
APPLICATIONS:
-
General purpose sealant
backing
-
Use together with
vertical or self-leveling sealants
-
Use above ground and for vertical joints
-
Expansion joints
-
Irregular joints
-
Metal and pre-cast panels
-
Around perimeters of door and window frames,
-
Coping and glazing joints
- Log Homes
DESCRIPTION:
-
Round poly foam joint filler
and backing for sealants.
- Provides controlled depth for sealants.
-
Compresses easily for accommodating joints of
varying widths.
- Does not stick
to sealants. Exceeds ASTM standards for bond breaker materials.
-
Consists of both open and closed cells on the
inside with a skin-like outer texture. Non-stick closed cell skin. High moisture resistance.
- Compatible with all know types of sealants
including butyl, polyurethane, silicones, tri-polymer, polysulfide,
acrylic, etc.
SIZING SOFT BACKER-ROD:
Select a backer-rod diameter that is approximately
25% larger than the width of the joint.
Joint Width Diameter
3/16" - 1/4" 3/8"
3/8" - 1/2" 5/8"
1/2" - 3/4" 7/8"
3/4" - 7/8" 1-1/8"
7/8" - 1-1/4" 1-1/2"
1-1/4" - 1-1/2" 2"
2" - 2-1/2" 3"
2-1/2" - 3" 4"
APPLYING BACKER ROD:
1. Joint fillers have three major functions:
-
Controls depth of the
sealant in proper
relation to joint width
-
Provides backing against
which the sealant
is applied, forcing the sealant to the sides of the
joint
-
Prevents 3-sided
bonding, ensuring proper
function of sealant
2. To install, compress backer-rod into the joint
before sealants are applied. Joint or opening should be clean and dry and free
of obstructions. Install backer-rod using a blunt probe or a plain faced
roller to force the rod to the desired depth.
3. Compress to a depth
of about 1/2 of the width measured at the crown of the backer rod.
.
4. A template or roller gauge may be used to
control the depth at which the rod is placed.
5. Don't stretch,
puncture or tear backer-rod during installation
but gently force into the joint so that the backer-rod
fits tight against the sides of the joint.
PRIMING:
1. Follow suggestions for joint-sealant application
as directed by sealant manufacturer.
2. Where priming of the joint is necessary, primer
should be applied only to the joint surfaces and
allowed to dry before Backer-Rod is placed. DO
NOT prime Backer-Rod
similar terms: backer rod, soft celled backer rod, chinking, chink backing,
caulk backing, sealant backing, sealant support, caulk support, soft cell
foam, closed cell foam rod, log home chinking
|
|
|
|
|
|