Crown Polymers #810 CrownCrete U Concrete Skim Coat Coating Kit, Non-Pigmented, 3-Part (1)

Product:

Crown Polymers #810 CrownCrete U Skim Coat Concrete Coating Kit, Non-Pigmented, 3 Component, High-Build, Water-Based. Includes 5 lbs. Part-A Resin, 5 lbs. Part-B Hardener, and 5 lbs. Part-C Aggregate. Price/Kit.

Ordering Notes:

Description:

Crown Polymers #810 CrownCrete U Skim Coat is a three-part urethane polymer concrete high-build coating. This product is designed as a thin film roll applied, concrete resurfacing classified, concrete protection flooring product ranging from 8mils to 16mils thickness. It can be easily applied with flat to 1/8 inch v-notched rubber squeegees, brushes, or rollers depending on the required film build and surface texture. This is an all-purpose product having versatile end benefits such as metal primer, concrete sealer, mid-coat, topcoat or aggregates seal coat for pigmented broadcast systems. Can also be used for patching, walls and coving when mixed with suitable aggregates. Two coats of this skim coat can withstand moisture vapor pressure up to 15 lbs./1000 sq. ft./24 hours. The kit includes 5 lbs. of Component-A Resin, 5 lbs. of Component-B Hardener and 5 lbs. of Component-C Aggregate. Do not mix the components until ready for immediate use.

Recommended Usage:

• Food and Beverages Industry, Chemical Processing Plant, Pharmaceutical Plants, Wash Bay, Waste Water Treatment, Coolers, Commercial Kitchens, Warehouse, Corridor, Mechanical Room.

Advantages:

• Water-Based, Low Emission.
• Contains 20% Plant Based Ingredients.
• Meets USDA, FDA, and CFIA Standards.
• Superior Adhesion to various Substrates.
• Superior Impact Resistant.
• Excellent Chemical Resistance.
• Meets California VOC and SCAQMD Requirements.
• Wide Temperature Service Range from -50ºF to 200ºF.
• High Tolerance to Moisture Vapor Drive, Up to 15lbs.
• Minimum Application Temperature is 35ºF and Above.
• Green Concrete applications after 7 days.
• Resistance to Growth of Bacteria and Fungi.

specifications:

• Color: Non-Pigmented
• Percentage Solids by weight: 100%
• Mix Ratio (By Volume): 3 Component Kit
• Viscosity at 70ºF: Not Applicable
• Pot Life at 70ºF: 15-20 minutes
• Dry Time at 70ºF: 6-8 hours
• Working Time at 70ºF: 15 minutes
• Spread Rate (primer): 150sq.ft. per unit at 8mils
• Volatile Organic Compounds (VOC): <5g/l
• Hardness: 80D
• Compressive Strength: 7650 psi
• Shrinkage: 0.10%
• Tensile Strength: 1280 psi
• Flexural Strength: 4250 psi
• Adhesion to Concrete: >400 psi, Concrete Failure
• Impact Resistance: >160 in./lb
• Water Absorption: < 0.01%
• Flame Spread/NFPA 101: Class 1
• Abrasion Resistance: 80mg Loss
• Coefficient of Friction: 0.60, Meet ADA
• Application Tools: 1/8 inch notch squeegee and 3/8 inch high quality non-shed nap roller.

Options:

• Colors: Available in Non-Pigmented, Blue, Grey, Dark Grey, Charcoal, Green, Tile Red, and Chestnut colors. See CrownCrete U Color Guide.

video on Mixing Skim Coat:

video on concrete surface preparation:

More Information

• Product Data Sheet
• Installation Guide
• Brochure